SIZE & POSITION
MENU | DESCRIPTION |
|
|
Moves the position of the display area on the screen horizontally. | |
| • This function is only available in Analog mode. |
| • Becomes enabled if the HDMI signal is received while the <PC/AV Mode> is set to <AV> |
| and the image size is set to <Screen fit>. |
|
|
Moves the position of the display area on the screen vertically. | |
| • This function is only available in Analog mode. |
| • Becomes enabled if the HDMI signal is received while the <PC/AV Mode> is set to <AV> |
| and the image size is set to <Screen fit>. |
|
|
Image Size | Analog signals |
| • <Auto> - The picture is displayed at the aspect ratio of the input signal. |
| • <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal. |
| • A signal not in the standard mode table is not supported. |
| • If the resolution is set to the optimal resolution, the aspect ratio does not change whether |
| the <Image Size> is set to <Auto> or <Wide>. |
| HDMI signals |
| • <4 : 3> - Displays pictures at the 4 : 3 aspect ratio. |
| • <16 : 9> - Displays pictures at the 16 : 9 aspect ratio. |
| • <Screen Fit> - If a 720P, 1080i or 1080P signal is input in HDMI input mode, the picture is |
| displayed as is without truncation. |
| This can only be set when the external input is connected through HDMI and <PC/AV Mode> is |
| set to <AV>. |
|
|
Menu | You can adjust the horizontal position of the OSD. |
|
|
Menu | You can adjust the vertical position of the OSD. |
|
|
Using the product |