Samsung LS24EDBLB/EDC manual Self-Test Feature Check, Settings, Question, Answer

Page 43

The screen colors have changed after changing the video card.

There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".

Has the video card been set properly?

Have you installed the monitor driver?

See the video card manual to see if the Plug & Play (VESA DDC) function can be supported.

Settings.

Set the video card by referring to the video card manual.

Install the monitor driver according to the Driver Installation Instructions.

Install the monitor driver according to the Driver Installation Instructions.

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an a service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz. (Do not exceed 60 Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter in the "Control Panel→System→Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur, contact an authorized service center.

Q & A

Question

How can I change the frequency?

Answer

The frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)

How can I adjust the resolution?

How can I set the Power Saving function?

How can I clean the outer case/LCD Panel?

Windows ME/XP/2000 : Set the resolution in the Control Panel → Display → Settings.

* Contact the video card manufacturer for details.

Windows ME/XP/2000 : Set the function in the BIOS-SETUP of the computer or the screen saver. (Refer to the Windows / Computer Manual).

Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water.

Do not leave any detergent or scratches on the case. Do not let any water enter the monitor.

Self-Test Feature Check

Self-Test Feature Check Warning Messages Environment Useful Tips

Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.

Page 42 Page 44
Image 43
Page 42 Page 44
Contents SyncMaster XL24 Notational PowerUse only a properly grounded plug and receptacle Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Do not use a damaged or loose plugDo not drop the monitor when moving it InstallationDo not place the product on the floor Do not place the monitor face down CleanKeep any heating devices away from the power cable Put down the monitor carefullyDo not spray water or detergent directly onto the monitor OthersDo not remove the cover or back Do not cover the vents on the monitor cabinet Do not install inside a vehicleNever insert anything metallic into the monitor openings Page Good Postures When Using the Monitor Cable UnpackingMonitor Driver MagicRotation softwareFront Power Cord DVI Cable USB Cable Type cable Others CalibraterHood Click here to see an animation clip Auto button Menu button Power button / Power indicatorDVI RearKensington Lock Connecting the Monitor Connecting the MonitorDVI-D DVI-I Tilt angle Changing the Stand and Installing the HoodsSliding Stand Swivel standAttaching a Base Removing the basePage Page Installing the Monitor Driver Manual Installing the Monitor Driver AutomaticMicrosoft Windows Vista Operating System Page Microsoft Windows XP Operating System Page How to install Microsoft Windows NT Operating System Microsoft Windows Millennium Operating SystemLinux Operating System Auto Description When pressing the Auto button after locking the OSDLocked MenuLocked When pressing the Menu button after locking the OSDContrast Menu DescriptionSource BrightnessSource PictureBrightness Contrast ColorDescriptionPlay/Stop Fine Sharpness ImageColor Tone Color Control Gamma CoarseTransparency Display Time OSDPosition LanguageInformation SetupAuto Source Image Reset Color Reset IndicatorInformation Installation Page Installation Problems System Requirements Can you see Check Signal Cable on the screen? Symptom Check List SolutionsCheck List Control Panel → Display → Refer to the Preset Timing ModesAnswer Self-Test Feature CheckSettings QuestionUseful Tips Self-Test Feature CheckGeneral PowerSaver Horizontal Frequency Preset Timing ModesPixel Clock Sync Polarity Display Mode Frequency MHz KHz HorizontalEurope Contact Samsung WorldwideNorth America Latin AmericaAsia Pacific CISMiddle East & Africa TermsAuthority For Better DisplayDisclaimer Wording for Adobe Software Products Europe Final Version 12TH September Suggestions for specific applications WarrantyWhat is Image retention ? Power Off, Screen Saver, or Power Save Mode
Related manuals
Manual 15 pages 26.77 Kb Manual 16 pages 13.85 Kb Manual 16 pages 21.06 Kb Manual 61 pages 8.57 Kb Manual 16 pages 13.31 Kb Manual 16 pages 49.1 Kb Manual 16 pages 45.25 Kb Manual 16 pages 62.49 Kb Manual 15 pages 11.81 Kb Manual 16 pages 21.85 Kb Manual 62 pages 13.72 Kb Manual 15 pages 26.24 Kb Manual 16 pages 56.01 Kb Manual 16 pages 62.69 Kb

LS24EDBLB/EDC specifications

The Samsung LS24EDBLB/EDC is a modern monitor that beautifully blends functionality with cutting-edge technology, making it an exceptional choice for both professional and personal use. This 24-inch display is equipped with an SVA (Super Vertical Alignment) panel, known for delivering vibrant colors and wide viewing angles. The monitor boasts a Full HD resolution of 1920 x 1080 pixels, ensuring that images and text appear sharp and clear, making it ideal for everything from gaming to graphic design.

One of the key features of the LS24EDBLB/EDC is its superior color reproduction. With an impressive 1000:1 contrast ratio, this monitor can produce deep blacks and bright whites, enhancing the overall viewing experience. The monitor supports 8-bit color depth, displaying over 16 million colors, making it suitable for professional tasks that demand color accuracy.

In terms of brightness, the monitor can reach up to 250 nits, providing adequate illumination for indoor settings. The LS24EDBLB/EDC also incorporates AMD FreeSync technology, which helps reduce screen tearing and stuttering during gaming sessions, allowing for smoother gameplay. This feature is especially beneficial for gamers looking to enhance their performance and enjoy a more immersive experience.

Ergonomically designed, the monitor includes a stand that allows for height adjustment, tilt, and swivel, ensuring comfortable viewing angles that can be customized to individual preferences. Additionally, the monitor is VESA-compatible, providing options for wall mounting to save desk space.

When it comes to connectivity, the Samsung LS24EDBLB/EDC offers versatile options, including HDMI and DisplayPort inputs, as well as a built-in USB hub for easy access to peripherals. The monitor is also designed with energy efficiency in mind, meeting Energy Star certification standards to reduce power consumption without compromising performance.

In conclusion, the Samsung LS24EDBLB/EDC stands out with its impressive display quality, adaptive technologies, and ergonomic features. It is an excellent choice for users seeking a reliable and versatile monitor that excels in both productivity and entertainment environments. Whether for work or play, this monitor truly delivers an exceptional viewing experience.
Top Page Image Contents