How to connect headset to PC

Plug the headset directly into a free USB port on your PC. Once connected, the headset's active mute and hooks- witch buttons will be illuminated.

The first time connected, your PC displays a small pop-up message in the task bar to indicate that a new device has been found. You are now ready to use the headset.

How to adjust volume on the Headset

Use the wheel at the center of the USB controller to adjust the volume. Turn clockwise to turn up and counterclock- wise to turn down. You will hear a soft click in the headset each time you adjust the volume.

When you reach maximum volume, the headset will beep twice as a warning. We recommend that you do not use the headset at full volume.

How to Wear the Headset

1 Adjust the headband length.

The headband is adjustable in length. Push or pull the top section of the band until the headset fits comfort- ably.

2.Wear the headset.

Position one speaker over each ear with the band going over the top of your head, just as with a traditional pair of headphones.

3.Position the microphone.

Adjust the microphone by rotating it around the headset and flexing the boom arm until it is positioned less than 2 cm (3/4") from your mouth. (The boom is free to rotate 360° or more.)

		2 cm
1	2	3/4"	3.1	3.2

How to mute the headset

It is possible to mute the microphone on the headset so that no sound/voice will be transmitted from the head- set to the PC.

By tapping the mute button the microphone is now muted. The light will go from solid green to pulsating red. It will continue to pulsate red while muted.

	To un-mute tap
	the mute button
	again and the
	light will go from	Green when not muted
	pulsating red to	Green when not muted
	pulsating red to
	solid green.
		Red when muted

How to answer a call from your PC SoftPhone

When a softphone call arrives, you will hear a ring tone in the headset. If you are using a Jabra-supported soft- phone*, then answer by tapping on the hook-switch button on the USB controller; tap again to hang up when you are done. Softphone control requires that you install Jabra PC Suite (described later in this manual)**.

For other softphones, use the native interface on your computer to answer and hang up.

When you are using a supported softphone, the USB controller lights work as indicated to the right.

You also have the					Solid green while idle
option of rejecting an					Solid green while idle
option of rejecting an
incoming call by pressing
and holding the assigned					Flashing green/
and holding the assigned
Soft button. The incoming
Soft button. The incoming					blue on incoming
call will then be rejected.					blue on incoming
call will then be rejected.					call
					call
					Red while on a call

*) See www.jabra.com for an up-to-date list of supported softphones. Support for Microsoft Office Communicator requires the Office Communicator version of the Jabra BIZ 2400 USB headset.

**) If using Microsoft Office Communicator you do not need to install Jabra PC Suite.

Jabra BIZ 2400 USB user manual How to connect headset to PC, How to adjust volume on the Headset