Setting up the application software
5.After restarting the computer, connect the PC to the camera with the USB cable.
6.Turn on the camera power.
The [Found New Hardware Wizard] will
open and the computer will recognise the camera.
Starting PC mode
If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". In this mode, you can download stored images to your PC through the USB cable.
The LCD monitor is always turned off in PC mode.
If your OS is Windows XP, an image viewer program will open.
If the download window of Digmax Master opens after starting Digimax Master, the camera driver was set up successfully.
INFORMATION
If you have installed the camera driver, The [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied.
Connecting the camera to a PC
1.Press the Setup menu button and press the F4 menu button.
2.Select the
3.Connect the PC to the camera with the USB cable.
Computer |
| Format |
|
|
|
Printer |
| Copy to Card |
Video Out
USB
Reset
Exit:BACK
63