Fn button: Exposure compensation
Fn button: Aperture Value
This camera automatically adjusts the exposure according to the ambient lighting conditions.
You can also select the exposure value by using the Fn button.
Compensating Exposure
EV
0 | 1 | 2 |
0 |
This mode will set the aperture value for automatic exposure in manual mode. Smaller aperture values make the object sharp but blur the background. Larger aperture values make both the object and background sharp.
00005 
F 2.8 
1/20 
1. | Press the Fn button, and then use the Up/Down button to select the | |||
| exposure compensation ( |
| ) icon. The exposure compensation menu | |
| bar will appear as shown. |
|
|
|
2. | Use the Left/Right button to set the desired exposure compensation | |||
| factor. |
|
|
|
3. | Press the OK button or Fn button again. The value you set will be | |||
| saved and the Exposure Compensation setup mode will close. If | |||
| you change the exposure value, the exposure indicator ( | ) will be | ||
Setting up the Aperture Value | Aperture Value |
Press the Fn button, then press Up/Down button to set the desired Aperture Value.
Fn button: Shutter Speed
displayed on the bottom of the LCD monitor. |
A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor should appear white or you may not get good pictures.
This mode will set the shutter speed for automatic exposure in manual mode. High shutter speeds can capture a moving object in a way that makes it seem as if the object is not moving. Low shutter speeds can capture a moving object, giving it a dynamic feeling of movement.
00005 
F 2.8 
1/20 
Shutter Speed
Setting up the Shutter Speed
Press the Fn button, then press the Left/Right button to set the desired Shutter Speed.
041