Lightolier A1202 installation instructions IS22UEM, Save These Installation Instructions

Page 1

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING LUMINAIRE

This luminaire is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electric shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

INSTRUCTION SHEET NO.

IS:22UEM

A1202

Page 1 of 2

INSTRUCTION FOR INSTALLATION OF PRE-WIRED COMPACT FLUORESCENT

EMERGENCY LIGHTING DECORATIVE LUMINAIRES

WARNING: (RISK OF FIRE) SUPPLY WIRE MUST BE RATED 90°C. MOST DWELLINGS BUILT BEFORE 1985 HAVE SUPPLY

WIRE RATED FOR 60°. CONSULT A QUALIFIED ELECTRICIAN BEFORE INSTALLATION.

NOTE: THIS INSTRUCTION SHEET IS TO BE USED IN CONJUNCTION WITH INSTRUCTIONS SUPPLIED FOR THE INSTALLATION OF SPECIFIC MODEL BEING INSTALLED.

IMPORTANT SAFEGUARDS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

WHEN USING ELECTRICAL EQUIPMENT , BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED INCLUDING:

1.Turn off AC power before proceeding.

2.Be sure all electrical connections are complete and outlet box is closed before inverter connector on emergency pack is connected.

3.Do not use outdoors.

4.Do not mount near gas or electrical heaters.

5.Do not attempt to service the battery. A sealed, rechargeable, no maintenance battery is used. Do not incinerate or mutilate; may burst or release toxic materials. Do not short circuit; may cause burns. Battery acid can cause burns to skin and eyes. If acid is spill on skin or eyes, flush with water and contact a physician immediately.

6.Equipment should be mounted in locations and at a height where it will not readily be subject to tampering by unauthorized personnel.

7.The use of accessory equipment is not recommended by the manufacturer and may cause an unsafe condition.

8.Do not use equipment for other than intended use.

9.This unit has more than one power supply connection point. To reduce the risk of electrical shock , disconnect both the normal and the emergency power supplies before servicing.

10.Before servicing to prevent electrical shock, disconnect the battery connector on the emergency pack (located behind the canopy access door). Make certain that the switch (if luminaire is switched) and the unswitched lines to the emergency pack are turned off at the fuse box. Servicing should be performed by qualified personnel only.

SAVE THESE INSTALLATION INSTRUCTIONS

WARNING: TO PREVENT HIGH VOLTAGE ON THE RED & YELLOW OUTPUT LEADS PRIOR

TO INSTALLATION, INVERTER CONNECTOR MUST BE OPEN. DO NOT JOIN INVERTER

CONNECTOR UNTIL INSTALLATION IS COMPLETE AND AC POWER IS SUPPLIED TO THE

EMERGENCY BALLAST.

1.Make sure AC power is off at fuse box.

2.Make sure that the necessary branch circuit wiring is available. An unswitched source of power is required for the emergency pack.

3.The emergency pack must be fed from the same branch circuit as the AC ballast.

4.In switched luminaires, “unswitched” lead must be connected ahead of any local switching.

5.Make supply wire connections. Use wire nuts (local hardware item). SEE PAGE 2 FOR WIRING DIAGRAM.

6.Be sure all electrical connections are made and the outlet box is closed before inverter connector is connected.

A COMPANY

631 Airport Road, Fall River, MA 02720

Image 1
Contents IS22UEM Save These Installation InstructionsInstruction Sheet no Operation Maintenance

A1202 specifications

The Lightolier A1202 is a versatile and highly regarded luminaire designed for both residential and commercial applications. Renowned for its efficiency and sleek design, this product has become a favorite among architects, interior designers, and homeowners seeking a balance between aesthetics and functionality.

One of the standout features of the Lightolier A1202 is its ability to deliver high-quality illumination while minimizing energy consumption. Using advanced LED technology, the A1202 provides bright, consistent lighting that enhances any space. The LED source not only ensures longevity but also significantly reduces the need for frequent bulb replacements, making it an economical choice over its lifetime.

The design of the A1202 is sleek and modern, enabling it to blend seamlessly into various decors. With its low-profile design, it can be easily mounted in ceilings, making it perfect for applications where space is limited. The A1202’s minimalist appearance is complemented by a range of color temperatures, allowing users to choose the perfect ambiance for their environments, from warm, inviting lighting in homes to cooler, more focused light in offices.

Another notable aspect of the A1202 is its adjustable features. Many models come with tilting and pivoting capabilities, allowing users to direct light where it is needed most. This flexibility is particularly beneficial in settings where task lighting is critical, such as kitchens, workspaces, or display areas in retail environments.

The A1202 also incorporates cutting-edge dimming technology. Compatible with various dimmer switches, this feature provides users with the ability to modify brightness levels according to their specific needs and preferences, enhancing both energy efficiency and user comfort.

In terms of installation, the Lightolier A1202 is designed for easy integration into existing setups. Its compact frame and modular design make it simple to install in new constructions or retrofit into older buildings, providing a hassle-free enhancement to any lighting scheme.

Lastly, the durability of the Lightolier A1202 is noteworthy, with high-quality materials ensuring resilience against the wear and tear of everyday use. This makes it not only a stylish choice but also a practical one for settings that require robust performance.

In summary, the Lightolier A1202 combines modern design, advanced LED technology, adjustable features, and energy-efficient operation, making it a leading choice for consumers looking for effective and stylish lighting solutions.