Important Safeguards

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE

This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electric shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

INSTRUCTION SHEET NO.

IS:EMSU

A0200

Page 1 of 3

INSTRUCTION FOR INSTALLATION OF PRE-WIRED COMPACT FLUORESCENT

EMERGENCY LIGHTING DECORATIVE SURFACE UTILITY FIXTURES

WARNING: (RISK OF FIRE) SUPPLY WIRING MUST BE RATED 90˚C. WHEN INSTALLING THE FOLLOWING MODEL NUMBERS ONLY: 5240WH326UE, 5241WH326UE, 5242PB326UE, 5243SA326UE, 5243SB326UE, 5543PB326UE AND 5543WH326UE. MOST DWELLINGS BUILT BEFORE 1985 HAVE SUPPLY WIRE RATED FOR 60˚.

CONSULT A QUALIFIED ELECTRICIAN BEFORE INSTALLATION.

NOTICE: THIS INSTRUCTION SHEET TO BE USED IN CONJUNCTION WITH INSTRUCTIONS

SUPPLIED FOR THE INSTALLATION OF SPECIFIC MODEL BEING INSTALLED.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED INCLUDING:

1.Turn off AC power before proceeding.

2.Be sure all electrical connections are complete and outlet box is closed before battery connectors on emergency pack are connected.

3.Do not use outdoors.

4.Do not mount near gas or electrical heaters.

5.Do not attemp to service the battery. A sealed, rechargeable, no maintance battery is used. Do not incinerate or mutilate; may burst or release toxic materials. Do not short circuit; may cause burns. Battery acid can cause burns to skin and eyes. If acid is spilled on skin or eyes, flush with fresh water and contact a physician immediately.

6.Equipment should be mounted in locations and at a height where it will not be readily subject to tampering by unauthorized personnel.

7.The use of accessory equipment is not reccommended by the manufacturer and may cause an unsafe condition.

8.Do not use the equipment for other than intended use.

9.This unit has more than one power supply connection piont. To reduce the risk of electrical shock, disconnect both the normal and the emergency power supplies before servicing.

10.Before servicing to prevent electrical shock, disconnect the battery connectors on the emergency pack (located on the end of the emergency pack). Make certain that the switch (if the fixture is switched) and the unswitched lines to the emergency pack are turned off at the fuse box. Servicing should be performed by qualified personnel only.

INSTALLATION

WARNING: TO PREVENT HIGH VOLTAGE ON THE RED & YELLOW OUTPUT LEADS PRIOR TO INSTALLATION, BATTERY CONNECTOR MUST BE OPEN. DO NOT JOIN BATTERY CONNECTOR UNTIL

INSTALLATION IS COMPLETE AND AC POWER IS SUPPLIED TO THE EMERGENCY BALLAST.

A. WIRING - Read and understand all instructions before proceeding.

1.Make sure AC power is off at fuse box.

2.Make sure that the necessary branch circuit wiring is available.

An unswitched source of power is required for the emergency pack.

3.The emergency pack must be fed from the same branch circuit as the AC ballast(s).

4.In switched fixtures, emergency pack must be connected ahead of any local switching.

5.Be sure all electrical connections are made and outlet box is closed before battery connectors on emergency pack are connected.

6.Select the appropriate wiring diagram to connect the emergency pack and the AC ballast: (See Pages 2 & 3)

LIGHTOLIER a GENLYTE THOMAS company.

631 Airport Road, Fall River, MA 02720

A0200 specifications

The Lightolier A0200 is a prominent fixture in the realm of lighting solutions, designed for both aesthetics and functionality. This product has become well-known for its versatile application in various environments, including residential, commercial, and institutional settings. The A0200 series emphasizes energy efficiency and longevity, appealing to sustainable practices in modern architecture and design.

One of the standout features of the Lightolier A0200 is its sleek and minimalist design. The fixture comes in a range of finishes, allowing it to blend seamlessly with diverse decor styles. This adaptability makes it suitable for use in living rooms, offices, corridors, and other spaces where ambient lighting is essential. The fixture also boasts a low-profile design, making it an excellent choice for ceiling installations where height may be limited.

The A0200 utilizes advanced LED technology, which provides numerous advantages over traditional lighting solutions. LEDs are known for their energy efficiency, consuming significantly less power while producing the same light output. This characteristic not only reduces energy bills but also contributes to a lower carbon footprint, aligning with environmentally-conscious initiatives. The lifespan of LED bulbs is another appealing aspect; they can last up to 25,000 hours or more, minimizing the frequency of replacements and maintenance efforts.

With a color temperature that can range from warm white to cool daylight, the A0200 allows for customization based on the mood and functionality required in a space. This flexibility supports various applications, from promoting relaxation in residential areas to enhancing focus in workspaces.

Additionally, the A0200 is designed with user-friendliness in mind. The installation process is streamlined, enabling quick and efficient setup. Many models within the series also offer dimming options, allowing users to adjust the brightness to create the perfect ambiance for any occasion.

In summary, the Lightolier A0200 is a fusion of style, technology, and practicality. Its energy efficiency, longevity, aesthetic appeal, and versatile application make it a valuable lighting choice for anyone looking to enhance their environment. Whether in a modern home or a busy office, the A0200 stands as a testament to the evolution of lighting technology in our everyday lives.