Samsung EC-ES65ZZBPWIL, EC-ES65ZZBPBGB, EC-ES67ZZBPBE1 Self-timer mode indicator, Motion Timer

Self-timer ( ) / Right button

ÊSelecting the self-timer

1.Select a Recording mode with the

exception of Voice recording mode.(p.21)

2. Press the Self-timer / Right ( ) button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor.

3. When you press the shutter button, the picture will be taken after the specified time has elapsed.

[Selecting the 10 SEC

self-timer]

ÊSelf-timer mode indicator

Icon Mode Description

Ê Motion Timer

Motion	Icon & Self-timer lamp
Pressing the Shuter button after	Blink (1 second interval)
setting the Motion Timer
Detecting the subject's movement	Blink (0.25 second interval)
No movement is detected	Turn on and the image is taken
	after 2 seconds

ÊThe Motion Timer flows are as followings. (Movie mode excluded)

Selecting the Motion Timer à Pressing the Shutter button à Confirming the composition (Within 6 sec.)*1 à Starting the detec- tion (Swing your hands fully)*2 à Stopping the detection

(Do not move) Ã Taking an image (after 2 sec.)

*1: The camera detects the subject's movement 6 seconds after pressing the Shtter button, so confirm the composition within 6 seconds.

*2: Move your body or hands fully.

10 Sec	Pressing the shutter button will allow an interval of
self-timer	10 seconds before the image is taken.
2 Sec	Pressing the shutter button will allow an interval of
self-timer	2 seconds before the image is taken.
	A picture will be taken after about 10 seconds and
Double	2 seconds later a second picture will be taken.
	When using the flash, the 2-second
self-timer
	self-timer may be delayed for longer than 2 sec-
	onds depending on the flash charging time.
Motion	The camera detects the subject's movement 6
	seconds after pressing the Shutter button, and the
Timer
	picture is taken when the movement is stopped.

In the following cases, the Motion Timer may not operate.

å The focus distance is over 3m.

åThe exposure is too bright or too dark.

åIn backlight conditions.

å The movement is insignificant.

åThe movement is detected beyond the center part (50%) of the sensor where the movement is recognized.

åIf the camera doesn't sense any movement for 30 seconds, or the camera doesn’t sense stillness after sensing movement.

The detection range of

Motion Timer

036