Lightolier ADS8G16MS140 Job Information, Consult factory for availability of louver finishes

Section 2/Folio G09-10

	VP PARABOLIC ADS8G16MS140
Page 2 of 2	8”x48” RECESSED FLUORESCENT16 CELL PARABOLIC LOUVER
	STATIC IES RP24 PREFERRED

AD

S

8

G

16

1

40

Advance		Fixture Width
Technology		8 = 8
Full Width	Body Style		Ceiling Type
Refector Louver	S=Static			G = Grid
48” in length			(Lay in T-Bar)

Number of		Lamp Quantity
Cells
	Louver finish

MS-Low

Iridescence

Reflector Matte

PS-Low Iridescence

CFI Anodized

Specular

		Voltage			Options
	120				Add appropriate
Lamp			Ballast Type
	277				suffix to calalog
Length				OC = T8
	347				no., ie HRD)
40 = 48”			SO = Electric
				T8
			DI = dimming

Consult factory for availability of louver finishes.

SPECIFICATIONS

PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity ratio of 1 reflectance 80% ceiling, 50% post-wall, 20% floor the CU. shall no be less than 0.69. To prevent glare the VCP shall not be less than 88 either length- wise or crosswise (at 100 fc level) and that the average luminance will conform with the IES RP-24 preferred standard, and have a fixture efficiency of not less than 60%.

MATERIALS: Chassis parts are die-formed 20 gauge cold rolled steel.

LOUVER:Post-anodized aluminum.

FINISH: Louver - Low iridescense specular post-wall, anodized vertical grain sheet or Low iridescence reflector matte post-anodized vertical grain sheet. Chassis exterior white baked polyester powder coat.

ELECTRICAL: Rapid start HPF thermally protected class “P” ballast CBM certi- fied by ETL if K.O. is within 3” of ballast use wire suitable for at least 90”. LABELS:Listed by CSA/UL.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902