Samsung HT-C9950W/XEF, HT-C9950W/XEN, HT-C9959W/XEG Connecting The Speakers, Surround speakers

Connecting The Speakers

1.Press down the terminal tab on the back of the speaker.

2. Connect the black wire to the black terminal(-), connect the wire wearing a colored band to the red(+) terminal, and release the tab.

3.Connect the connecting plugs to the back of the Subwoofer by

matching the colours of the speaker plugs to the speaker jacks.

4. With the product turned off, insert the TX card into the TX Card Connection(WIRELESS) on the back of the Subwoofer.

•Hold the TX card so that the label "WIRELESS" faces leftward and insert the card into the port.

•The TX card enables communication between the product and the

wireless receiver module.

5. Connect the left and right surround speakers to the wireless receiver module.

Attaching the Toroidal Ferrite Core to the Speaker Cable

1.Open the smaller ferrite core by pulling up

the tab.

2. Arrange up the speaker cables that are connected to the FRONT L (+,-) terminal before making 3 loops of them.

3. Attach the ferrite core to the arranged cables and press to close it until you hear a click.

• Insert the ferrite core as close to the sub woofer as possible.

4. Follow steps 1 through 3 above and insert the ferrite core to each speaker cable that is connected to any of the FRONT R (+,-) and

5.Make 3 loops of the speaker cables that are connected to the REAR L and REAR R terminals of the wireless receiver (SWA- 5000) and insert the smaller ferrite core in the same way as step 3 above.

02 Connections