Network Test, Network Status, Wi-Fi Direct

✎✎ NOTES

`` Contact the manufacturer of the router for instructions explaining how to access the route's Set Up screens or refer to the router's user's manual.

`` For WPS connection, set your wireless router’s security encryption to AES. Setting to WEP security encryption does not support WPS connection.

Network Test

Use this menu item to check whether your network connection is working or not.

Network Status

Use to check whether a connection to a network and the Internet has been established.

Wi-Fi Direct

The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the player and each other using a peer-to-peer network, without a wireless router.

✎✎ NOTES

`` Some Wi-Fi Direct devices may not support the DLNA function if connected via Wi-Fi Direct. If this is the case, it is advisable to change the network connection method between devices.

`` Bluetooth transmissions can interfere with the Wi-Fi Direct signal. Before you use the Wi-Fi Direct function, we strongly recommend that you turn off the Bluetooth function of any active mobile device.

111Turn on the Wi-Fi direct device and activate its Wi-Fi Direct function.

222In the Home screen, select Settings, and then press the v button.

333Select Network, and then press the v button.

444 Select Wi-Fi Direct, and then press the v button.

The Wi-Fi Direct devices that you can connect appear.

555You have three ways to complete the Wi- Fi connection:

•• Through the Wi-Fi device.

•• Through the player using PBC.

•• Through the player using a PIN. Each is covered below.

Through the Wi-Fi Device

111On the Wi-Fi device, follow the procedure on the device for connecting to another Wi-Fi Direct device. See the device's user manual for instructions.

222When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the v button to accept.

333The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

Through the Player Using PBC

111Select the Wi-Fi Direct device you want to connect to this player, and then press the v button. The PBC/PIN pop up appears.

222Select PBC, and then press the v button. The PBC pop-up appears.

333Press the PBC button on the Wi-Fi Direct device within 2 minutes.

444The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

Through the Player Using a PIN

111Select the Wi-Fi Direct device you want to connect to this player, and then press the v button. The PBC/PIN pop up appears.

222Select PIN, and then press the v button. The PIN pop-up appears.

333Note the PIN code in the pop-up, and then enter it into the appropriate field in the Wi-Fi Direct device you want to connect.

444The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

✎NOTES✎

`` The current wired or wireless network connection will be disconnected when you use the Wi-Fi Direct function.

`` Text files, such as files with a .TXT or .DOC extension, will not display when you are using the Wi-Fi Direct function.

Screen Mirroring

The Screen Mirroring function lets you view the screen of your smart phone or android tablet on the TV you have connected to the Blu-ray player.

111In the Home menu, press the ▲▼◄► buttons to select Screen Mirroring, and then press the v button. The Screen Mirroring pop-up appears.

222Launch DLNA Cast on your device.

333On your device, find the name of the Blu- ray player in the list of available devices and then select it.

444The TV will display a PIN. Enter the PIN into your device.

555The TV displays a connecting message (for example, Connecting to Android_92gb...) and then displays the connected message.

666In a few moments, the screen of your device appears on the TV screen.

777To stop Screen Mirroring, press the EXIT or RETURN button on the remote control, or disable Screen Mirroring function of your smart phone.

✎NOTES✎

`` You can connect to a device that supports DLNA Cast. Note that connecting to such a device may not be fully supported depending on the manufacturer. For further information on mobile connection support, refer to the manufacturer’s web site.

`` When you are using the Screen Mirroring function, video stuttering or audio dropouts may occur, depending on your environment.

`` Bluetooth transmissions can interfere with the Screen Mirroring signal. Before using the Screen Mirroring function, we strongly recommend that you turn off the Bluetooth function on your smart phone or smart device (tablet, etc.).

Device Name

Device Name function allows you to change player's name by selecting from device name list.