Samsung BD-C7500/XEN, BD-C7500/XSS manual Setting Up the Wireless Network Connection Manual

Setup

9.To enter the Pass Phrase, follow these general directions:

•Press the number keys on your remote to enter numbers.

•Use the arrow keys on your remote to move from button to button on the Security Key screen.

•To enter letters, move to the button labelled a/A/1/, and then press the ENTER button. Each time you press the ENTER button, you change the kind of characters you can enter (a/A/1/).

•To enter a letter, press the number button that corresponds to the letter. Pressing the button repeatedly changes the letter.

•To delete the last letter or number you entered, move to the Delete button, and then press the ENTER button.

•To clear all entered letters and numbers, move to the Clear key, and then press the ENTER button. You can also just press the RED (A) button on your remote.

10.When done, press the YELLOW (C) button on your remote, or move to the Done button, and then press the ENTER button.

The Network Connecting screen appears.

11.Wait until the connection confirmation message is displayed, and then press the ENTER button. The Network Settings screen reappears.

12.To test the connection, press the ▼ button to select Network Test, and then press the ENTER button.

Setting Up the Wireless Network Connection - Manual

If the Auto Setting does not work, you need to enter the Network settng values manually.

To get the Network setting values from most Windows computers, follow these steps:

1.Right click the Network icon on the bottom right of the screen.

2.In the pop-up menu, click Status.

3.On the dialog that appears, click the Support tab.

4.On the Support tab, click the Details button. The Network settings are displayed.

To Enter the Network settings into your product, follow these steps:

1.On the Internet Protocol Setup screen, press the ENTER button.

2.Press the ▲▼ buttons to select Manual, and then press the ENTER button.

3.Press the ▼ button to go to the first entry field (IP Address).

Settings

Display		Network Setting
Audio	Access Point Selection		: Not Selected				\
SystemInternet Protocol Setup			: Manual
Network		IP Address	:	0	0	0	0
Language Subnet Mask			:	255	255	255	0
Security		Gateway	:	0	0	0	0
GeneralDNS			: Manual			0	0
Support		DNS Server	:	0	0
		a PBC (WPS) > Move		" Select		' Return

4.Use the number buttons to enter numbers.

5.When done with each field, use the ► button to move successively to the next field.

You can also use the other arrow buttons to move up, down, and back.

6.Enter the IP Address, Subnet Mask, and Gateway values.

7.Press the ▼ to go to DNS.

8.Press the ▼ button to go to the first DNS entry field. Enter the numbers as above.

9.When done, press the ▲ button to return to Access Point Selection. Select the network, and then press the ENTER button.

10.Go to Step 6 in the Automatic Wireless procedure above, and follow the directions from that point on.

40 English