Lightolier Baselyte-BSL25 specifications Circuit A/B Switching alternate 4’ sections Type B 2cct

Page 7

 

Lighting SystemsBaselyte-BSL25

Page of 7

 Light T5 HO Indirect

Wiring Options: 2 Circuit A/B Switching (alternate 4’ sections)

2 Circuit A/B Switching (alternate 4’ sections)

Type B: 2cct.

Type A: 2cct. w/1cct. thru wire

Type S: 2cct. w/2cct. thru wire







Fixture wired for two circuit. Lamps wired for A/B switching in alternate 4’ sections.

2 Circuit A/B Switching (alternate 4’ sections) with Emergency Circuit/Night Light (EC/NL)

Type C: 2cct. w/EC/NL





%#.,

One 4’ section in a two circuit fixture (A/B switching) to be wired on a separate thru circuit. Leads for both normal circuit and EC/NL circuit wired to fixture ends.

2 Circuit A/B Switching (alternate 4’ sections) with Emergency Battery Pack (EM)

Type D: Chloride standard CTP700

Type O: Bodine standard LP550

Type G: Chloride high performance CTP1300

Type R: Bodine high performance LP600





 %-

Fixture wired for two circuits (A/B switching), plus a battery pack is wired to one lamp. A hot lead is connected to the battery pack and would act as a ‘trigger’ wire when connected to a constant hot by installer. Leads for both normal circuit and battery pack are wired to fixture ends.

2 Circuit A/B Switching (alternate 4’ sections) with Emergency Circuit/Night Light and Emergency Battery Pack

Type L: Chloride standard CTP700





%#., %-

One 4’ section in a two circuit fixture (A/B switching) to be wired on a separate thru circuit, in addition, a battery pack is wired to one lamp. Installer can connect ‘trigger’ wire to EC hot lead if controlled together or wired separately if controlled independently. Leads for normal circuit, EC/NL circuit and battery pack are wired to fixture ends. All lamps in EC/NL module to be wired together.

Job Information

Type:

Lightolier a Genlyte Company

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2005 Genlyte Group LLC • 0205 Rev.1

Image 7
Contents Ordering Information SpecificationsOrdering Instructions Module Lengths & Mounting Distances Run ConfigurationSystem Components & Accessories PerformanceMount Type T-Bar 9/16 On-Grid Mounting OptionsMount Type T-Bar 15/16 On-Grid Supension LengthMount Type T-Bar Variable Position Mount Type T-Bar Fixed Position 1/4-20 Threaded RodMount Type Support or Open-Joist Ceiling Cord Types Mount Type Non-Accessible Ceilings concrete, gypsum etcConductor Circuit with Emergency Battery Pack EM Wiring Options 1 CircuitCircuit Type 1 1cct Type O Bodine standard LP550 Circuit A/B Switching alternate 4’ sections Type B 2cctType C 2cct. w/EC/NL Type D Chloride standard CTP700