| Lighting Systems |
Page of 8 | 4 Light T5 HO |
Wiring Options: 2 Circuit Center/Outer Switching
2 Circuit Center/Outer Switching
Type 2: 2cct.
Type 9: 2cct. w/1cct. thru wire
Type I: 2cct. w/2cct. thru wire
Fixture wired for two circuit. Lamps wired for center/outer switching.
2 Circuit Center/Outer Switching with Emergency Circuit/Night Light (EC/NL)
Type 4: 2cct. w/EC/NL
%#., | ||
%#., | ||
%#., | ||
%#., |
One 4’ section in two circuit fixture (center/outer switching) to be wired on a separate thru circuit. Leads for both normal circuit and EC/NL circuit wired to fixture ends. All lamps in EC/NL section to be wired together.
2 Circuit Center/Outer Switching with Emergency Battery Pack (EM)
Type 6: Chloride standard CTP700
Type N: Bodine standard LP550
Type F: Chloride high performance CTP1300
Type Q: Bodine high performance LP600
%- | ||
Fixture wired for two circuits (center/outer switching), plus a battery pack is wired to one lamp. A hot lead is connected to the battery pack and would act as a ‘trigger’ wire when connected to a constant hot by installer. Leads for both normal circuit and battery pack are wired to fixture ends.
*Note:
2 Circuit Center/Outer with Emergency Circuit/Night Light and Emergency Battery Pack
Type K: Chloride standard CTP700
%#., | ||
%#., | ||
%#., %- | ||
%#., |
One 4’ section in a two circuit fixture (center/outer switching) to be wired on a separate thru circuit, in addition, a battery pack is wired to one lamp. Installer can connect ‘trigger’ wire to EC hot lead if controlled together or wired separately if controlled independently. Leads for normal circuit, EC/NL circuit and battery pack are wired to fixture ends. All lamps in EC/NL section to be wired together.
*Note:
Job Information | Type: |
Lightolier a Genlyte Company | www.lightolier.com |
631 Airport Road, Fall River, MA 02720 • (508)
© 2005 Genlyte Group LLC • 0205 Rev.1