Radio Shack 32-2038A Care, Specifications, Using the Powerhorn Without the Microphone Mounted

Page 2

Using the Powerhorn Without the Microphone Mounted

When using the Powerhorn for an extended time, the shoulder strap can hold the Powerhorn and you can use the lightweight microphone to broadcast your message.

Follow these steps to use the Powerhorn without the microphone mounted.

1.Set SIREN on the left side of the handle to OFF.

2.Place the strap over your shoulder and adjust it as desired.

3.Place the microphone about 5 inches from your mouth and press the TALK bar on the left side of the microphone when you speak.

4.To speak continuously without having to press the TALK bar, slide it in the direction of the LOCK arrow until it clicks. Slide the bar to the opposite position to unlock it.

5.Rotate VOLUME on the right side of the microphone toward 10 to increase, or toward 0 to decrease, the Powerhorn’s volume.

Note: If feedback occurs, move the microphone away from the front of the speaker, decrease the volume, or adjust the FEEDBACK CONTROL (see “Using the Feedback Control”).

Using the Siren

To turn on the siren, set SIREN to ON. To turn it off, set SIREN to OFF.

Warning: Do not point the Powerhorn directly at someone when you turn on the siren.

Using the Feedback Control

If you experience feedback problems while using the Powerhorn indoors, open the battery compartment and use a small Phillips screwdriver to rotate the FEEDBACK CONTROL counterclockwise to reduce feedback.

Note: Adjusting FEEDBACK CONTROL to reduce feedback also reduces the volume. To increase the volume, rotate FEEDBACK CONTROL clockwise until the sound is audible without feedback. If you are unsure how to make this adjustment, take the Powerhorn to your local RadioShack store for assistance.

CARE

Keep the powerhorn dry; if it gets wet, wipe it dry immediately. Use and store the powerhorn only in normal temperature environments. Handle the powerhorn carefully; do not drop it. Keep the powerhorn away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the powerhorn’s internal components can cause a malfunction and might invalidate its warranty. If your powerhorn is not performing as it should, take it to your local Ra- dioShack store for assistance.

SPECIFICATIONS

Frequency Coverage

450 Hz–10 kHz

Power Source

8 C 1.5 V Batteries

Operating Voltage

12V

Power Rating

10 W (Maximum)

Impedance

Speaker: 8 Ohms

 

Microphone: Low Impedance (condenser)

Current Drain

140 mA–250 mA

Drive Current

At Talk: 2.4A (Under); At Siren 4.0A (Under)

Output Level

Over 105 dB

Distance Range (Approximate)

1.6 Miles (2.57 km)

 

 

(Quiet Suburban Area)

 

0.8 Miles (1.29 km) (City Area)

Dimensions (HWD) (Without Microphone Attached)

...... 97/8 13 9 Inches

 

 

(25 33 22.7 cm)

Weight (with Batteries)

4.4 lbs

 

 

(2.0 kg)

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

Limited Ninety-Day Warranty

This product is warranted by RadioShack against manufacturing defects in mate- rial and workmanship under normal use for ninety (90) days from the date of pur- chase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RE- SULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVE- NUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limita- tions or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the de- fect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All re- placed parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty pe- riod.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to fol- low instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or bat- teries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street, 6th Floor,

Fort Worth, TX 76102

12/99

 

32-2038A

RadioShack Corporation

08A01

Fort Worth, Texas 76102

Printed in China

Image 2
Contents Preparation Installing BatteriesUsing the Powerhorn with the Microphone Mounted OperationUsing the Siren SpecificationsUsing the Powerhorn Without the Microphone Mounted Using the Feedback Control

32-2038A specifications

The Radio Shack 32-2038A is a versatile and compact multimeter that has become a staple for hobbyists and professionals alike. Known for its reliability and ease of use, this device is a testament to Radio Shack’s commitment to providing affordable yet effective electronics tools.

One of the standout features of the 32-2038A is its ability to measure various electrical parameters. It can accurately read voltage, current, and resistance, making it ideal for troubleshooting and workflow analysis in a variety of electronic applications. The multimeter is capable of measuring both AC and DC voltage, ranging from millivolts to 600 volts. This flexibility allows users to diagnose everything from small batteries to household electrical systems.

In terms of current measurement, the device can handle up to 10A of direct current, providing ample capability for most technical tasks. The resistance measurement ranges from ohms to megohms, which is crucial for testing circuits and ensuring components are functioning correctly. The 32-2038A also includes a diode test feature, allowing users to check the health of diodes easily.

An essential characteristic of the 32-2038A is its clear, easy-to-read display. The LCD screen provides precise readings, and the bright backlight facilitates use in low-light conditions, enhancing usability in various environments. The device is built with user-friendly dial controls that allow for quick switching between measurement modes, enabling seamless transitions while working on different tasks.

The design of the Radio Shack 32-2038A is both robust and portable. It is lightweight, making it easy to transport for on-site measurements or mobile projects. The durable casing helps protect the unit from drops and impacts, ensuring longevity even in challenging work conditions.

Moreover, the multimeter often includes features such as auto-ranging, which simplifies the measurement process by allowing the device to automatically select the appropriate range for the measurement being taken. Some models include data hold functions, providing added convenience when reading measurements in less accessible areas.

The Radio Shack 32-2038A serves as an excellent tool for electronics enthusiasts, engineers, and technicians alike. Its combination of practical features, solid performance, and user-friendly design makes it a reliable companion for anyone looking to engage in electrical measurements and repairs. Whether for educational purposes, DIY projects, or professional applications, this multimeter stands out as a reliable choice in its category.