Disc
Playback
ENG
Selecting a CD in the Disc changer
To select a specific disc, press the DISC CHANGE button on the front panel or DISC SKIP on the remote control, until the required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
•If the disc selected is not loaded, the next disc is played automatically.
| • For mixed discs, the play order is as below:MP3/WMA DIVX JPEG. |
Note | |
| Depending on the content of the disc, the initial screen may appear |
| |
| • different. |
| • Depending on the recording mode, some |
| For CD discs, you can press the numeric buttons to select the track, when |
| • you press the numeric buttons after 3 seconds, the playback starts |
| automatically. |
| Table of contents of a |
| • recorded on the disc. |
| • DTS Audio is not supported. |
| • DVD Audio Disc is not supported. |
OPERATION
To stop playback, press STOP button during playback.
•
•
If pressed once, the stop position will be stored in memory. If PLAY ( 
) button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
If pressed twice, “STOP” is displayed, and if PLAY ( ) button is pressed, playback starts from the beginning.
To temporarily pause playback, press PAUSE button during playback.
•To resume playback, press PLAY( 
) button again.
16