Samsung M1001GW1/YLW manual Washing for the first time, Putting detergent in the washing machine

Washing a Load of Laundry

10.Program Selector Knob

Turn the knob to select the desired program. The program is shown as follows

CODE	PROGRAM	TEMP	CODE	PROGRAM	TEMP	CODE	PROGRAM	TEMP
1	White Cotton	95˚C	6	Non-Colorfast Cotton	40˚C	11	Wool	30˚C
2	White Cotton	60˚C	7	Synthetic	60˚C	12	Wool	-
3	White Cotton	40˚C	8	Synthetic	40˚C	13	Rinse+Spin	-
4	White Cotton	30˚C	9	Synthetic	30˚C	14	Spin	-
5	Colorfast Cotton	60˚C	10	Delicate	40˚C	15	Drain	-

11.Rinse Hold Button

The laundry remains lying in the water after the last rinse. This function is suitable for delicate laundry and net curtains.

Before the laundry can be unloaded, the "Spin" or "Drain" program must be performed.

Washing for the first time

Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:

1. Turn the Program Selector Knob to the “3” position.

2. Pour a little detergent into compartment in the detergent drawer.

3.Turn on the water supply to the washing machine.

4.Press the Start button.

• This will remove any water from the manufacturer’s test run remaining in the machine.

Putting detergent in the washing machine

1.Pull out the detergent drawer.

2.Add laundry detergent into compartment .

3.Add softener into compartment (if you desire).

4.Add prewash detergent into compartment (if you desire).

*Option Using Hot Water

• The hot water valve is operated when you select a water temperature option above 60˚C (60 ˚C or 95 ˚C).

To add liquid detergent:

1.Remove the divider from its slot and insert it into compartment .

8 SAMSUNG Washing Machine Owner’s Instructions