3.
C |
Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).
C |
D |
4.Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.
5.Turn part (C) in the arrow direction to tighten it.
6.While holding down part (D), connect the water hose to the adaptor. Then, release part (D). The hose fits into the adaptor with a clicking sound.
Installation
7.If you are using a screw type of water tap, use the provided
English 21
3/27/2017 3:16:26 PM