Samsung RL38SBPS1/XES Cleaning the Water Dispenser, Dispenser Tray, Water or beverage bottles

USING THE WATER DISPENSER (Only available on some models)

INSTALLING A REGULAR BOTTLE

Press the fixing lever, lift the exclusive water tank upwards, then remove it.

Remove the water supply device from the exclusive water tank, then set the inner groove of the water supply device in a regular mineral water bottle and fix-it in position by turning it.

Turn the water supply device over, then fix-it in position in the fixing hole.

	• Gurgling sounds may be heard when air enters the water bottle from regular mineral
Note	water or beverage bottles.

•Some regular mineral water or beverage bottles may not fit the water supply device, depending on their size.

•If water does not come out satisfactorily when you press the “push” lever, press it again.

•Do not use carbonated drinks, such as coke, cider or sodas. When you press the button, the beverage may spurt out due to the pressure of carbonic gas accumulated in the upper part of beverage bottle.

•For better hygiene, beverages with a high sugar content (juice, soft drinks) are not recommended.

•You can use bottled mineral water or boiled tap water unless it does contain any particles.

CLEANING THE WATER DISPENSER

Dispenser Tray

Pull out the tray with fingers.

Empty the water in the dispenser tray, then clean it using warm water and detergent.

Connection path

Wipe out the connection path and surrounding area with a clean damp cloth.

13