Samsung DVD-D360/XE, DVD-D360/XN Reference, Setting Up the DivX, Troubleshooting, Specifications

Setting Up the DivX

1.With the unit in Stop mode, press the MENU button.

2.Press the √/® buttons to select DivX Page, then press the † or ENTER button.

3.Press the π/† buttons to select the desired item, then press the ® or ENTER button.

Note :

•Press Ok will make the registration code window disappear.

•DivX can only be accessed at stop mode.

Reference

Troubleshooting

Before requesting service (troubleshooting), please check the following.

Problem			Action
The screen is	• Press the	button (in front panel) for more than 5 seconds under no disc
blocked	inside. All settings will revert to the factory settings.
Forgot password.	• Press the		button (in front panel) for more than 5 seconds under no
	disc inside. All setings including the password will revert to the factory
	settings. Don’t use this unless absolutely necessary.

Specifications

	Power Requirements	AC 110-240 V ~ 50/60 Hz
	Weight	1.2 KG
	Power Comsumption	For the power supply and Power Consump-
		tion, refer to the label attached to the product.
General
	Dimensions	360mm (W) X 207mm(D) X 42mm (H)
	Operating Temperature	+5°C to +35°C
	Range
	Operating Humidity Range	10 % to 75 %
		R(Red) : 0.7 Vp-p (75 Ω load)
		G(Green) : 0.7 Vp-p (75 Ω load)
	Scart Jack	B(Blue) : 0.7 Vp-p (75 Ω load)
		Composite Video : 1.0 Vp-p (75 Ω load)
Video
		Luminance Signal : 1.0 Vp-p (75 Ω load)
Output		Color Signal : 0.3 Vp-p (75 Ω load)
		Y : 1.0 Vp-p (75 Ω load)
	Component Video	Pr : 0.70 Vp-p (75 Ω load)
		Pb : 0.70 Vp-p (75 Ω load)
	Frequency Response	20Hz ~ 20kHz
Audio	Maximum Output Level	2Vrms
Output	Digital Audio Out	Coaxial terminal (S/PDIF)
	Output terminal	RCA, SCART

11