Samsung DVD-D360/EN, DVD-D360/XN, DVD-D360/ZF manual Connections, Choosing a Connection

Page 4

Connections

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

-Refer to the user’s manual of the additional components you are connecting for more informa- tion on those particular components.

A. Connecting to a TV (SCART)

-Using Scart cable, connect to SCART terminal on the rear of the DVD player to the SCART IN terminals of TV.

-Turn on the DVD player and TV.

-Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen.

B.Connecting to a TV (VIDEO CVBS)

-Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.

-Turn on the DVD player and TV.

-Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen.

Note

-Noise may be generated if the audio cable is too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page.

-The number and position of terminals can vary depending on your TV set. Please refer to the user's manual of the TV.

-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.

-If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (SCART-CVBS I-SCAN P-SCAN SCART-RGB).

C. Connection to an Audio System (2 Channel Amplifier, Dolby Digital, or MPEG2)

-Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier.

-If Using the video signal cable(s), connect the VIDEO terminals on the rear of the DVD player to the VIDEO terminal of your TV, If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) termi- nal of the Amplifier.

-Turn on the DVD player, TV, and Amplifier.

-Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

4

D. Connections to a TV Interlace / Progressive

-Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.

-Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

-Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

-Set the Video Output to I-SCAN/P-SCANin the Display Setup menu. You can use the VIDEO SEL. button to change the Video Output mode.

Note

-What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.

-There is no component video displayed when "SCART-RGB" Selected by pressing VIDEO SELECT button on remote control.

 

2-Channel stereo ampilfier,

RED

WHITE

COAXIAL CABLE C

Dolby digital

 

 

 

WHITE

 

 

WHITE

BLUE GREEN

RED

RED

 

 

YELLOW

RED

 

AUDIO CABLE

VIDEO CABLE B

 

A SCART CABLE

 

 

D COMPONENT CABLE

 

 

 

YELLOW

 

Do not use the connection

RED

WHITE

RED

BLUE GREEN

Scart and Component Video

 

 

 

 

(Y.Pb,Pr) Simultaneously

Image 4
Contents DVD Player AK68-02083APrecautions SetupDescriptions Tour of the Remote Control Disc MarkingsRegion Number Connections Choosing a ConnectionBasic functions Advanced functions Using the Zoom Function Clips Menu for MP3/WMA/JPEG/MPEG4/CD AudioFolder Selections MP3/WMA/CD Audio PlaybackPlaying Media File Using the USB Host feature MPEG4 PlaybackCD Ripping Picture CD PlaybackChanging setup menu Setting Up the DivX TroubleshootingSpecifications ReferenceMemo Memo Memo Memo Region Area Contact Center  Web Site Lecteur DVD Configuration PrécautionsTable des matières Caractéristiques des disquesDescription Face avant Notation sur le disque TélécommandeCode régional de lecture Branchements Fonctions élémentaires Fonctions Avancées Effacement d’un signet Utilisation de la fonction ZoomMenu Clips pour MP3/WMA/ JPEG/ MPEG4/CD Audio Modifier un dossier Pour sélectionner le dossier parentDescription de la fonction MPEG4 Fichier CD-R AVIUtilisation de la fonctionnalité USB Host Hôte USB RemaqueLecture de CD Photo Extraction audioDiaporama Changement Du Menu Configuration Configuration des options DivX Problèmes et solutionsProblèmes Résolution Fiche TechniqueSpécifications GénéralPrise Péritel VidéoMemo Memo Memo France DVD Player Bedienungsanleitung Vorsichtsmaßnahmen EinführungBeschreibung SymboleÜberblick zur Fernbedienung Anschlüsse wählen AnschlüsseHinweis Grundfunktionen Langsames Spiel Bildformat anpassen EZ ViewAudio-Sprache wählen Untertitel-Sprache wählenZoom-Funktion verwenden Clip-Menü für MP3/WMA/JPEG/MPEG4/CD AudioOrdner auswählen MP3/WMA/CD Audio Dateien wiedergebenMPEG4-Dateien wiedergeben Multimedia-Dateien von einem USB-Gerät abspielenCD kopieren Picture CDs wiedergebenDrehen DiashowSetup-menü ändern Problem Vorgehensweise Weitere informationenDivX einstellen FehlersucheTechnische Daten Memo Memo Memo Deutschland DVD Speler Gebruiksaanwijzing Voofzofgsmaatregelen InstellingenProgressieve Scanuitgangen 576p BeschrijvingDe toetsen van de afstandsbediening Aanduidingen op de diskAansluiten Een verbinding kiezenEen disk afspelen De functie Zoeken en Skip gebruikenHet Diskmenu het Titelmenu gebruiken OpmerkingSpeciale Functies De functie Zoom De zoomfunctie gebruiken DVD Menu Clips voof MP3/WMA/ JPEG/MPEG4/CD AudioMappen selecteren MP3/WMA/CD Audio afspelenMPEG4 afspelen Repeat/AfspelenMPEG4 Functiebeschrijving Mediabestanden afspelen met de functie USB Host USB-hostFoto-CDs afspelen Cd’s rippenJpeg op CD-R Instellingen menu wijzigen Problemen oplossen NaslagDivX instellen SpecificatiesMemo Memo Memo NEdErLand bELgiË Correcte behandeling van een gebruikte accu uit dit productLuxembourgbelgique
Related manuals
Manual 64 pages 53.37 Kb Manual 32 pages 5.14 Kb Manual 64 pages 36.93 Kb Manual 32 pages 15.95 Kb Manual 32 pages 17.16 Kb Manual 64 pages 30.67 Kb Manual 64 pages 54.08 Kb

DVD-D360/XN, DVD-D360/EN, DVD-D360/ZF specifications

The Samsung DVD-D360 is a versatile DVD player that has captured the attention of multimedia enthusiasts with its impressive array of features and technologies. This player is designed to deliver high-quality audio and visual experiences, accommodating various disc formats and file types, making it a great addition to any home entertainment system.

One of the standout features of the DVD-D360 is its compatibility with multiple disc formats, including DVD, CD, and VCD, allowing users to enjoy an extensive library of media without any restrictions. This flexibility is further enhanced by support for various video formats, including MPEG-4 and JPEG, enabling the playback of a wide range of content, from movies to photo slideshows.

An essential characteristic of the DVD-D360 is its user-friendly interface, designed for easy navigation and operation. The remote control provides convenient access to all functions, such as play, pause, skip, and menu settings, making it simple for users to connect and manage their media. Additional input options include USB connectivity, allowing for the direct playback of multimedia files from external drives, enhancing the player’s usability.

In terms of video quality, the DVD-D360 utilizes advanced technologies to ensure clear and vibrant playback. It features progressive scan capabilities, providing a smoother image with improved detail compared to traditional interlaced scanning. This technology is particularly beneficial for viewers using high-definition TVs, as it maximizes the visual quality of standard DVDs.

Another highlight of the Samsung DVD-D360 is its audio performance. With support for various audio formats, including Dolby Digital, users can experience immersive sound quality that enhances their viewing experience. The player is equipped with multiple audio output options, including optical and coaxial outputs, allowing for easy integration with high-end audio systems.

Power consumption is also a consideration, and the DVD-D360 is designed with energy efficiency in mind, making it an environmentally friendly choice for consumers. Its compact design ensures it can fit seamlessly into any entertainment setup without occupying much space.

In summary, the Samsung DVD-D360 offers a blend of versatile playback capabilities, user-friendly features, and impressive audio-visual performance. Whether you are watching your favorite movies, enjoying music, or viewing photographs, this DVD player provides an enjoyable and convenient multimedia experience for all users.