Samsung DA-E670/ZF, DA-E670/EN manual WPA-PSK Tkip WPA2-PSK AES, Network connection is complete

Page 16

To connect the Wireless Audio with Dock to a Wireless Network

This section describes 4 methods of connecting the Wireless Audio with Dock to a wireless network.

▪▪ Some of network related operations may be different than explained depending on performance and supported functions of used AP.

▪▪ To configure the network connection to your router or modem, see the router or modem's user manual.

▪▪ The Wireless Audio with Dock supports the following security protocols: --WEP ; Open

--WPA-PSK ; TKIP

--WPA2-PSK ; AES

▪▪ You can also connect the Wireless Audio with Dock to a network that does not have security and has no password.

▪▪ If your wireless router supports DHCP, this Wireless Audio with Dock can use a DHCP or static IP address to connect to the wireless network.

▪▪ Select a channel on the wireless router that is not currently being used, if the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.

▪▪ If you select the Pure High-throughput (Greenfield) 802.11n mode and set the encryption type on your router to WEP or TKIP, then the Wireless Audio with Dock will not support a connection in compliance with new Wi-Fi certification specifications.

▪▪ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles, interference with other radio devices, etc)

▪▪ WPS(PBC) / WPS(PIN) does not operate when the security protocol is set to WEP.

▪▪ If you fail to set up the network, press and hold the WPS/RESET button on the rear panel until the

or indicator blinks twice. Wait until the red light stops blinking, turn off and on the unit. And try again.

To connect the Wireless Audio with Dock to your Apple device having iOS 5.0 or above (Info Sharing)

This network set-up method is for users of Apple devices that have iOS 5.0 or later.

1.Connect the Apple device to your network.

2.Select on the Wireless Audio with Dock, and then connect the iPod /iPhone /iPad device to the Dual Dock.

3.Press and hold the WPS/RESET button on the rear panel of the Wireless Audio with Dock with a pen tip or similar item for more than 1 second. The icon will blink once. Release the buttom.

4. Select <Allow> in the pop-up menu on the display of the Apple device.

5. Change the mode to the and then the indicator will blink in red and changes to solid white. After the Wireless Audio with Dock connects, the indicator stops blinking in red, and glows in white.

•The network connection is complete.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Wireless Audio with Dock Thank you for purchasing this Samsung productFeatures Safety information Safety WarningsThis symbol indicates dangerous voltage Accompanying the productPrecaUtiOns Contents Before Reading the User’s Manual Getting startedWHAT’s inclUDED Descriptions TOP/Front/Rear Panel910 ED scriptionsSwitches the mode as follows Controls the volume levelSelected mode is displayed in white on the Function Display Lets you connect to a network using a LAN cableRemote control Tour of the Remote ControlInstalling battery in the Remote Control Operation Range of the Remote ControlTUrning tHe POWer On/Off Power on and volume controlADJUsting tHe VOLUMe Connections InstaLLing tHe tOrOiDaL ferrite On tHe POWer caBLeConnEctions Using tHe sPacer cOVer For apple Device Users For galaxy Device UsersCOnnecting a DeVice tO tHe DUaL DOcK How to connect a device to the Dual DockConnecting AN Audio Device Using AUX External deviceConnecting to Your Network To connect the Wireless Audio with Dock to a Wired NetworkService Broadband service ModemWPA-PSK Tkip WPA2-PSK AES Network connection is completeButton on the top panel of the Wireless Audio with To connect the Wireless Audio with Dock using WPS PBCIndicator changes from white to red and blinks Page To connect the Wireless Audio with Dock using a WPS PIN Bluetooth What is Bluetooth?Connecting to Bluetooth Devices To cancel pairing to your TVTo pair to your TV ConnectDock Using the TV Mode SoundShare PlayingSamsung Galaxy Devices EnG g playinCompatibility list Apple Device Apple DevicesWireless Audio with Dock will be disconnected Using the Bluetooth ModeCurrently connected device will be disconnected Using the USB Mode Before you connect a USB deviceBit rate KbpsUsing airplay and allshare play mode Using the input mode FunctionsBasic fUnctiOns You can select the following inputs aUX LeD OffUsing the Bass function Advanced functionsMuting the sound FunctionsSoftware Upgrade only USB mode Troubleshooting Specifications AppendixOpen Source Announcement Code No. AH68-02482N Area Contact Centre  Web Site
Related manuals
Manual 136 pages 22.18 Kb Manual 170 pages 811 b Manual 3 pages 55.23 Kb Manual 1 pages 18.44 Kb Manual 136 pages 38.92 Kb Manual 102 pages 17.78 Kb

DA-E670/XE, DA-E670/EN, DA-E670/ZF specifications

The Samsung DA-E670/XE is a high-performance audio dock that beautifully marries modern design with cutting-edge technology, delivering an exceptional sound experience. One of the main features of this device is its dual docking capabilities, allowing it to accommodate both Apple iOS and Samsung Galaxy devices. This versatility makes it a popular choice for users with varied smartphone ecosystems, providing seamless connectivity and ease of use.

One of the standout technologies employed in the DA-E670/XE is the inclusion of vacuum tube technology. This innovative feature enhances the sound quality by adding warmth and richness to the audio output, which is especially noticeable during the playback of vocal and acoustic music. The integration of this technology with modern digital amplification ensures that users enjoy a well-rounded listening experience that is both dynamic and engaging.

In terms of sound output, the DA-E670/XE boasts a total power output of 100 watts, making it suitable for both intimate settings and larger spaces. The speaker system is designed with a high-fidelity sound structure, ensuring balanced audio reproduction across various genres. With two 20-watt speakers and a built-in subwoofer, users can expect deep bass, clear mids, and crisp highs, creating an immersive sound stage.

The design of the DA-E670/XE is equally impressive, featuring a sleek, contemporary look that complements any modern interior. The wood finish gives it an elegant touch, distinguishing it from more conventional plastic speaker docks. The intuitive interface, including easy-to-use buttons and a clear display, makes navigating through different functions straightforward.

Moreover, this audio dock supports Bluetooth connectivity, allowing users to stream music wirelessly from their smartphones, tablets, or computers. With support for multiple audio formats, it can play back a variety of music files, enhancing its versatility.

The Samsung DA-E670/XE stands out as a sophisticated audio solution, combining aesthetic appeal with advanced technology. It is an excellent choice for audiophiles and casual listeners alike, providing high-quality sound performance and connectivity options that cater to today's multimedia needs. Its ability to blend traditional audio warmth with modern digital precision makes it a remarkable addition to any sound system.
Top Page Image Contents