Basic Functions
Dolby Pro Logic II Mode
You can select the desired Dolby Pro
Logic II audio mode.
Press the 
PL II button.
| When listening to music, you can | |
MUSIC | experience sound effects as if you | |
are listening to the actual | ||
| ||
| performance. | |
MOVIE | Adds realism to the movie | |
soundtrack. | ||
| ||
| You can listen to a 2CH sound | |
| source in 5.1CH surround sound | |
PROLOGIC | with all speakers active. | |
- A specific speaker(s) may not | ||
| ||
| output depending on the input | |
| signal. | |
MATRIX | You will hear multi channel | |
surround sound. | ||
| ||
| Select this to listen to sound from | |
STEREO | the front left and right speakers | |
| and the subwoofer only. |
✎NOTE
Before selecting Dolby Pro Logic II mode, connect your external device to the AUDIO INPUT jacks (L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to surround sound.
iPod SYNC
If you insert your iPod player into the iPod Dock that has already been connected to the system, you can play the video files in your iPod player through the connected TV.
If the video signal does not synchronize
properly with the audio signal, press B GREEN (B) on the remote control to correct the synchronization.
✎NOTE
Before you can play the video files in the iPod player, you must connect the Audio/Video terminals of the TV to the home theater using the Composite (A/V) cable.
54 English
The models below support audio sync settings. Press GREEN (B) on the remote control to change audio delay.
Supported Models : classic/3G nano/4G nano/120GB classic/160GB Classic/5G nano
Playing back a Picture
G
Viewing Photo Files
1.Connect a USB memory that contains JPEG files or insert a disc that contains JPEG files.
2.Press the ◄► buttons to select the My Contents, and then press the ENTER button after press the ▲▼ buttons to select the Photos.
3.Press the ▲▼◄► buttons to select the folder you want to play, and then press the ENTER button.
4.Press the ▲▼◄► buttons to select the photo you want to play, and then press the ENTER button.
✎NOTE
You can’t enlarge PG graphic in the full screen mode.