![](/images/new-backgrounds/1216075/21607545x1.webp)
Wireless Receiving Module (SWA-4100)
1.Connect the front, centre and Subwoofer speakers to the
2.Connect the left and right rear speakers to the wireless receiving module.
3.Plug the power cord of the wireless receiving module in the wall outlet.
4.Turn on the
M Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the main unit, some sound interruption may be heard due to interference.
If you use a device such as a microwave oven, wireless LAN Card or any other device that uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference.
The transmission distance from the main unit to the wireless receiving module is about 10m, but may vary depending on your operating environment. If a
If the main unit doesn't make wireless connection, the system needs ID Setting between
main unit and wireless receiver module. With the main unit turned off, press the remote control's number button buttons "0"J"1"J"3"J"5" and the main unit will turn on. With the wireless receiver module turned on, press "ID SET" button on the back of the unit for
5 seconds.
The wireless receiving antenna is built into the wireless receiver module. Keep the unit away from water and moisture.
For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions.
If no sound is heard from the wireless rear speakers, switch the mode to DVD 5.1 channel or Dolby ProLogic II .
In
ENG
● CONNECTIONS
23