Setting the Clock, Press PROGRAM/SET | Samsung MAX-G55R/EDC specs

ENG

All functions available on the system can be viewed on the display and the display's brightness can be switched between "on" and "off".

1	Press the DEMO button.
1	Result: All functions available on the system appear on the front
	panel display.
	Each of these are explained in detail in this guide. Please refer to the
	relevant section.
2	Press the DIMMER button.
	Result: The Dimmer function is selected and the display darkens.
3	Press the DIMMER button once again to brighten the front panel
	display.

A display brightness control can only be performed while the system power is on.

12,3

You can save the power consumption while the unit is turned off (on standby)

1 In Standby/on mode, press and hold the POWER button for longer than 3 seconds.

Result: ECO displays and the main set automatically switches itself into the power saving mode.

Setting the Clock

Your system is equipped with a clock which allows you to turn your system on and off automatically.

You should set the clock:

When you first purchase the mini-compact system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing STANDBY/ON.
2	Press TIMER/CLOCK twice.
3	Result: CLOCK is displayed.
	Press PROGRAM/SET.
	Result: The hour flashes.
4
	To...			Press the TUNING button
	Increase the hours
	Decrease the hours
5	When the correct hour is displayed, press PROGRAM/SET.
	Result: The minutes flash.
6
	To...			Press the TUNING button
	Increase the minutes
7	Decrease the minutes
	When the correct time is displayed, press PROGRAM/SET.
	Result: The clock starts and is displayed, even when the system is in
	standby mode.

	You can display the time, even when you are using another
	function, by pressing TIMER/CLOCK once.
	You can also use	,		buttons on the main unit to instead of

	TUNING button	or	in step 4, 6.

3,5,7

4,6

4,6 4,6