Samsung MM-E320/UM Repeating One or All Tracks on the Compact Discs, CD Programming, Skip Track

Repeating One or All Tracks on the Compact Discs

You can repeat playing CD indefinitely.

●●CD containing a specific track.

●●Whole tracks of a selected CD.

1.Press REPEAT button.

Each time you press the REPEAT button, the repeat mode will change as following:

MP3 : OFF ;TRACK ; DIR ; ALL; RANDOM .

CD : OFF ;TRACK ; ALL; RANDOM .

•Depending on your product,the repeat mode display maybe different.

2.When you wish to stop the Repeat function, press REPEAT until "OFF" is displayed.

•OFF : Cancels Repeat Playback.

•TRACK : Repeatedly plays the selected track.

•DIR : Repeatedly plays all tracks in the selected folder.

•ALL : Repeatedly plays the all tracks in

the disc.

•RANDOM : Plays tracks in random order.

Searching for a Specific Music Passage on a CD

When listening to a compact disc, you can quickly search for a specific music passage on a track.

CD Programming

(This function is not available during playback of an MP3/WMA-CD.)

●●You can program the playback order of up to 24 tracks of your choice.

●●However, you must stop playing the CD before selecting tracks.

1.While in CD playback mode, press STOP(@) to stop playing the CD.

2.Press the ENTER button to display the message below:

(01= program number, --= track number)

3.Use [ or ] to move to a desired track.

•Press [ to move to the previous track.

•Press ] to move to the next track.

4.Press the ENTER button to confirm your

selection,the selection is stored and displayed.

5.To select a different track, following the steps 3 to 4 above.

6.Press PLAY (p) to play the programmed tracks.

7.Press STOP (@) to stop playing the programmed tracks, Press STOP (@) again to cancel playing the programmed tracks.

•If you open the disc tray ,change the function or turn off the product, your programming will be canceled.

To search for Press

-Forwards ............... ) button

-Backwards ............ ( button

Press and hold the [/] button on the top panel to automatically scan for a track.

10 Skip Track

Press the +10 button while in playback mode.

This will skip the tracks as many as 10 from the current track.

8English

Check and Edit the Programmed Tracks

You can check a list of programmed tracks and edit them as you want.

1.If a programmed track is being played, press STOP (@) once.

2.Press ENTER twice to display the message below:

(C=Check, 01= program number)

If a total of 24 tracks are already programmed, “C” will be displayed rather than “P” in the display.

3.Repeat pressing ENTER until the desired track is displayed.

4.Press [ or ] to select a different track.

5.Press ENTER to confirm your selection.

6.To play the programmed tracks, press PLAY (p).