Samsung SCC-B5393P, SCC-B5392P manual

Set the LL switch to ON while the AC power is connected. If any picture roll happens, you have to adjust the phase using the phase-control buttons. Press the INC or DEC button to increase or decrease the phase by one degree.

2.Switch 2 (LSS): This sens-up mode accumulates the image ﬁelds in memory to reduce noise but increase the brightness and contrast rate. When this switch is set to ON, the camera automatically switches to a maximum of 128 times of image acquisition speed to implement a clear picture for darker image.

3.Switch 3 (H-REV): When this switch is set to ON, the camera image is reversed horizontally. If you want to monitor your site using a mirror, you can use this feature to see the right image.

4.Switch 4 (V-REV): When this switch is set to ON, the camera image is reversed vertically. If your camera reluctantly displays the vertically reversed image, you can use this feature to see the right image.

5.Switch 5 (BLC): When this switch is set to ON, you can view a clear image even though the camera faces any excessive light such as sunlight and ﬂuorescent light. When it is set to OFF, the subject with excessive light is not clearly shown.

6.Switch 6 (FL): When this switch is set to ON, the shutter speed is ﬁxed to 1/100 sec (for NTSC) or 1/120 sec (for PAL) to prevent screen from ﬂickering by the disaccordance between vertical synchronous frequency (50Hz for NTSC, 60Hz for PAL) and on-and- off frequency of a light.

7.Switch 7 (D/N): When this switch is set to ON, the camera automatically switches between color and B&W according to the brightness of the vicinity.

8.Switch 8 (AWB): This switch adjusts white balancing. When this switch is set to ON, this camera operates in ATW mode, and in case of OFF, this camera operates in AWC mode.

ATW (Auto Tracking White Balance): The color temperature is automatically adjusted according to the environmental change. (Approx. 2000°K to 11,000°K)

AWC (Auto White Balance Control): It stores the color temperature just when the switch is changed to OFF. Accordingly color temperatures are adjusted by the stored value.

Caution

-. The IRIS setting range for the camera is approximately 80 to 120 IRE. It means the camera does not provide the IRIS full open/close feature but the restricted variation range.

-. Use the camera after setting to the proper level (80 IRE or above) because the IRIS hunting may occur when the level is 75 IRE or below.

SCC-B5392P, SCC-B5393P specifications

The Samsung SCC-B5392P and SCC-B5393P are advanced CCTV cameras designed to deliver high-quality surveillance solutions for various applications. Both models are equipped with features that enhance their performance in monitoring environments, making them suitable for use in commercial, industrial, and residential settings.

One of the key features of the SCC-B5392P and SCC-B5393P is their exceptional image quality. With a high-resolution CCD sensor, both cameras provide clear and detailed images, even in low light conditions. The SCC-B5392P offers a resolution of up to 600 TV lines, while the SCC-B5393P achieves an even higher resolution, ensuring that every detail is captured accurately. This level of clarity is essential for identifying individuals and monitoring activities effectively.

Another significant characteristic of these models is their advanced digital signal processing (DSP) technology. This enhances the cameras' ability to adjust to varying lighting conditions, minimizing the effects of glare and backlighting. The Wide Dynamic Range (WDR) feature further improves image quality by balancing the light levels in scenes with significant contrasts, ensuring that both bright and dark areas are visible.

The SCC-B5392P and SCC-B5393P are designed for durability and reliability. They feature a weatherproof housing, making them suitable for outdoor installation. This robustness allows them to withstand various environmental conditions, ensuring consistent performance over time. Furthermore, the cameras are equipped with infrared (IR) capabilities, enabling them to capture clear images in complete darkness, which is crucial for round-the-clock surveillance.

These models also support various mounting options, facilitating flexible installation in different locations. Their user-friendly interface allows for easy configuration and adjustment, ensuring that users can optimize the camera settings for their specific surveillance needs. Additionally, both cameras are compatible with a range of video management systems, allowing for seamless integration into existing surveillance setups.

In summary, the Samsung SCC-B5392P and SCC-B5393P are high-performance CCTV cameras that combine advanced imaging technology, robust construction, and versatile installation options. With their ability to deliver high-quality images in diverse conditions, they are an excellent choice for anyone looking to enhance their security systems.