Samsung HW-C779S/XEG manual Setting the Test Tone, W Æ F.R Æ S.R Æ Sbr Æ Sbl Æ S.L

SETTING THE TEST TONE
Use the test tone to check the speaker connection status or level.
1. Press the SETUP/MENU button.
• Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
	Æ
2. Press the ENTER button to select SETUP ENTER.
3. Press the ▲▼ buttons to select TEST TONE, and then press the ENTER
or ► button.
4. Press the ▲▼ buttons to select the option you want, and then press the	Æ
ENTER or ► button.
• AUTO : Test signal will be automatically output as follows; F.L Æ CEN
Æ S.W Æ F.R Æ S.R Æ SBR Æ SBL Æ S.L.
	Æ
- During test tone output, press the ▲▼ buttons to adjust the speaker
output level from -10 to +10 dB by 1 step.
• MANUAL : Enables you to adjust the output level of the speaker
manually.
1) Press the ENTER button to select the speaker you want.	Æ
Each time you press the ENTER button, F.L Æ CEN Æ S.W Æ F.R
Æ S.R Æ SBR Æ SBLÆ S.L will be selected in turn.

2)Press the ▲▼ buttons to set the Test Tone mode you want.

You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB.

-Test Tone Output -

• F.L (front left) : -10 ~ +10dB	• CEN (centre) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB	• S.W (subwoofer) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB	• SBL (surround back left) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB	• SBR (surround back right) : -10 ~ +10dB

- To stop test tone -

•Press the SETUP/MENU button once.

SETUP OFF appears on the display and test tone stops.

M In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows : F.L Æ FHL Æ CEN Æ S.W Æ FHR Æ F.R Æ S.R.

ENG

● SETUP

37

HW-C700-C770S-C770BS-ELS_0309.in37 37 2010-03-09 ￿￿ 10:12:17