Samsung HW-H551/EN, HW-H551/TK, HW-H551/ZF manual Connections, Installing the Wall Mount

Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or damage the product.

When the unit is installed on a wall, please make sure that children do not pull any of the connecting cables, as it may cause it to fall.

For the optimal performance of a wall mount installation, install the speaker system at least 2 inches (5 cm) below the TV.

For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely to fall.

connections

INSTALLING THE WALL MOUNT

You can use the wall mount bracket to mount this unit on a wall.

Installation Precautions

•Install on a vertical wall only.

•For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of the set.

•Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the unit on a different wall that can support the unit's weight.

•Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, fix the support screws into wall studs.

•Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar on.

•Diameter : M5

•Length: 1 3/8 in (35 mm) or longer recommended.

•	Connect cables from the unit to external devices before you install it on the wall.	2 inches(5 cm) or more
•	Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an
	electric shock.

1.Place the installation guide against the wall surface.

• The installation guide must be placed parallel to the wall.

•Installation should be done at least 2 inches (5 cm) below the TV.

2. Mark the location where the screws will go through on the wall using a pen, and then remove the installation guide.

3. Fasten the wall mount and screw to the marked location.

• The left and right mounts are different shapes.

4.Secure the two holder screws to the screw holes on the back of the

Soundbar's main body, one on the left and one on the right.

5.Insert the USB cable into the unit before installing it on the wall.

6. Set the holder screws on the back of the Soundbar into the grooves of the

wall mount.
For safe installation, make sure to push the holder screws all the way to	Using the Soundbar with Wall Mount
the bottom of the grooves.

Detaching the Wall Mount [Wall Mounting the Soundbar]

1 .Pull the Soundbar upwards as shown in the figure to separate it from the wall mount.

Using the Soundbar with Wall Mount

[Detaching the Soundbar from the Wall Mount]

▪▪ Do not hang onto the installed unit and avoid any impact to the unit.

▪▪

▪▪

▪▪

▪▪

10