Samsung NP-RV408-A01RU, NP-RV408-A01UA, NP-RV408-A01VN manual Repairing the product

Page 17

Caution

Failing to follow instructions marked with this symbol may cause slight injury or damage to the product.

Usage Related

Do not place a candle, light cigar, etc. over or on the product.

There is a danger of fire.

Use a wall outlet or multi- plug with a grounding part.

Failing to do so may cause electric shock hazard.

Make sure to have the product tested by a safety service engineer after

Do not use your computer and AC-Adapter on your lap or soft surfaces.

If the computer temperature increases, there is a danger of burning yourself.

Connect only permitted devices to the connectors or ports of the computer.

Failing to do so, may cause electric shock and fire.

Do not touch the antenna with electricity facility such as the power outlet.

There is a danger of electric shock.

When handling computer parts, follow the instructions on the manual supplied with the parts.

Failing to do so, may cause damage to the product.

repairing the product.

Authorized Samsung Repair Centers will carry out safety checks after a repair. Using a repaired product without testing it for safety may cause an electric shock or fire.

In case of lightning, immediately turn the system off, disconnect the power cord from the wall outlet and phone line from modem. Do not use a modem or phone.

There is a danger of electric shock or fire.

Close the LCD panel only after checking if the notebook computer is turned off.

The temperature may rise and it may cause overheating and deformation of the product.

Do not press the Eject Button while the Floppy Disk/CD- ROM drive is in operation.

You might lose data and the disk might be suddenly ejected and could cause an injury.

Take care not to drop the product while using it.

This may cause personal injury or loss of data.

If the computer emits smoke, or there is a burning smell, disconnect the power plug from the wall outlet and contact a service center immediately. If your notebook is external & removable battery type, remove the external battery.

There is a danger of fire.

Do not use a damaged or modified CD/Floppy Disk.

There is a danger of damaging the product or personal injury.

Do not insert your fingers into the PC Card Slot.

There is a danger of injury or electric shock.

17

Image 17
Contents User Guide Page Contents Page Chapter Page Before You Start Safety Precaution NotationsText Notations CopyrightAbout Memory Capacity Representation About the Product Capacity Representation StandardAbout HDD Capacity Representation Installation Related Safety PrecautionsKeep the plastic bags out of the reach of children There is a danger of suffocationPower Related Connect the power cord to the AC adapter firmly AC Adapter Usage PrecautionsUsing another adapter may cause the screen to flicker Failing to do so may result in fireAuthorized Parts Battery Usage RelatedThere is a danger of electric shock or choking There is a danger of an explosion or fire Usage Related This may result in harming or burning your skin Upgrade RelatedFailing to do so, may cause electric shock Custody and Movement RelatedDo not place a heavy object over the product Installation Related Battery Usage RelatedUse only a battery authorized by Samsung Electronics Repairing the product Take care not to throw or drop a computer part or device Take care when touching the product or partsTake care not to damage the data on a hard disk drive Battery will be preserved at its best conditionProduct might be damaged or users may trip over the cables When using the AC power plug Using the power supply in an airplaneProper Posture Proper Posture During Computer UseKeep your arm at a right angle as shown by the figure Eye Position Hand PositionUse Time Break Time Volume Control Headphones and SpeakersIllumination Operation ConditionSetting Up your System Important Safety InformationSafety Instructions Care During Use Instruction On Safety Operation of NotePC Laser Safety Note Replacement Parts and AccessoriesBattery Disposal Laser Safety Do not unplug the power cord by only pulling the cable Power Cord RequirementsGeneral Requirements Requirements listed below are applicable to all countriesRegulatory Compliance Statements Wireless GuidancePage Other Wireless Devices USA and Canada Safety Requirements and NoticesUnited States of America Use in specific environmentsUnintentional Emitter per FCC Part FCC Part If fitted with a modem device Intentional emitter per FCC PartPage Intentional Emitter per RSS CanadaUnintentional Emitter per ICES-003 Brazil European Union CE Marking and Compliance Notices European UnionEuropean Directives Manufacturer InformationEU R&TTE Compliance Statements Maltese MaltiMagyar HungarianLocal Restriction of 802.11b/802.11g Radio Usage European Economic Area RestrictionsGeneral BelgiumPage Battery return systems Weee Symbol InformationBasic Items Computer Standard Battery AC Adapter Power CableFront View OverviewStatus Indicators Right View Left View Wired LAN PortDC Jack Fan VentsBattery Latches BatteryLatch used to remove or install the battery Bottom ViewPower AC Adapter Cable DC-in Jack Attaching the BatteryTurn on the computer Connect the AC adapterPress the + key to increase the LCD brightness Turn on the computerUsing Sleep Mode in Windows 7/Vista Using Sleep ModeUsing Stand by Mode in Windows XP Click StartChapter Shortcut Keys KeyboardFn+ FunctionSystem software media disk Mode, select the Advanced menu Fan Silent Mode LowSystem software media disk. Optional EasyScreen Brightness Control Volume ControlNumeric Key Turns the numeric keyboard on or offTouch Area TouchpadTouchpad Left Button Scroll AreaConnect the CD drive to the USB port Connecting the CD DriveInserting and Ejecting a CD Status Indicator Emergency Hole Eject ButtonExample SD Card Multi Card Slot OptionalTo Insert and Use a Memory Card To remove a memory card Using a Mini SD and RS-MMCTo format a memory card Take hold of the end of the card and remove the cardMute Adjusting the VolumeAdjusting the Volume using the Keyboard Chapter Measuring the Remaining Battery ChargeYou can adjust the LCD brightness in 8 levels Controlling the Brightness Using the KeyboardInstructions for Cleaning the LCD LCD Brightness ControlEntering the Bios Setup Bios SetupSetup Menu Help Bios Setup ScreenSetup Items Setup Menu Description ExitF5/F6 System Setup KeysSetting a Supervisor Password Setting a Boot PasswordSetting a User Password Set Supervisor Password itemDeactivating the Password Setting Up a Boot PasswordPriority item Changing the Boot PriorityFixing Screw Upgrading MemoryReplacing the Memory Memory Slot Installing/Removing the Battery BatteryPrecautions Check if the battery latch has been moved inwardsTo use the shortcut key to view Charging the BatteryBattery Usage Time Information Using the Battery Calibration Function Extending the Battery Usage TimeMove to the Boot Smart Battery Highlight Yes in the Battery CalibrationUsing the Security Lock Port Chapter Product Specifications Energy Star Partner Registered TrademarksPage
Related manuals
Manual 180 pages 21.59 Kb