Using the Software
Installing the 7” USB Monitor Driver
•System Requirements CPU : 1.73GHz or Later
OS : Windows XP Service Pack2 or later.
RAM : 512 MB RAM or more
USB : 1.1 or higher (USB 2.0 recommended)
Installing Your USB Monitor
•Make sure to connect the USB cable and begin the installation after your PC has booted.
•The Setup program requires about one minute for the installation. If you turn the power off or remove the USB cable while the Setup program is running, it may cause an error with the PC or the Windows operating sys- tem.
•The optimal resolution for this USB monitor is 800x480.
1.Insert CD into the
2.Click "I Accept".
3.The progress window appears, as shown in the figure below.
4.If you connect your USB monitor to your PC, it recognizes the monitor and the "Found New Hardware" wizard is displayed, as shown in the figure below.