Introduction
You can customize key assignment for the Custom button according to your pref- erences.
Note
You can configure the customized key for a required function via Setup > Cus- tomized Key.
Brightness button [
]
When OSD is not on the screen, push the button to adjust brightness.
>>Click here to see an animation clip 
Adjust buttons [
]
These buttons allow you to adjust items in the menu.
Enter button [
] / SOURCE button
Activates a highlighted menu item.
Push the '
/SOURCE', then selects the video signal while the OSD is off. (When the 
/SOURCE button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode
Note
If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable.
>>Click here to see an animation clip 
AUTO button
Use this button for auto adjustment.
>> Click here to see an animation clip
Power button [
]
Use this button for turning the product on and off.
Power Indicator
This light is lit when operating normally, and blinks once when your adjustments are saved.
Note
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods.
Rear
Note
The configuration at the back of the product may vary from product to product.
10