Samsung CZ15VTSN/XEG manual Image Lock, Position

4_E50X-3p-28p Page 14 Wednesday, July 11, 2001 12:11 PM

Adjusting Your LCD Monitor

Table 2. Screen controls (Continued )

Icon	Menus and		Function Descriptions
	Sub-menus		–	+
	Image Lock:	Image Lock controls adjust for and limit the amount of
		noise in the video signal which causes horizontal lines
		or areas on the screen where the image appears to be
		unstable and jitters or shimmers.
	„ Fine	The Fine and Coarse adjustments allow you to more
	„ Coarse *	closely adjust your monitor to your preference.
		Use the “–” and “+” buttons to adjust away
		interference.
		If satisfactory results are not obtained using the Fine
		adjustment, use the Coarse adjustment and then use
		Fine again.
		This function may change the width of the display
		image. Use the H-Position menu to center the display
		image on the screen.
	H-Position *

V-Position *

*NOTE: Depending on the video adapter you are using, the lower limit of the control can not go down to Min. Number on OSD or go up to Max. Number on OSD. This is due to the video signal character istics due to the video graphics adapter, and it narrows the range of user adjustable parameter. When your LCD monitor detects this video signal and reaches the limit, it displays information message saying “Limit Reached” to inform you that the parameter can not be adjusted any further.

English 14