Samsung LS22MYKDSCA/EN Cannot see the On Screen Display, Screen suddenly has become unbalanced

Page 60

Troubleshooting

A:You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly.

A:Adjust the maximum resolution and frequency that the monitor can handle properly.

A:If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1680 x 1050 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum Mode", "Recommended Mode 1680 x 1050 60 Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

Q:There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals?

A:The monitor is in PowerSaver mode.

A:Press a key on the keyboard to activate the monitor and restore the image on the screen.

A:If there is still no image, press the ‘/SOURCE’ button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

Q:Connected using the DVI cable?

A:You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals. Connect the DVI cable and then reboot the system.

I cannot see the On Screen Display.

Q:Have you locked the On Screen Display (OSD) Menu to prevent changes?

A:Unlock the OSD by pressing the [MENU/ ] button for at least 5 seconds.

The screen shows strange colors or just black and white.

Q:Is the screen displaying only one color as if looking at the screen through a cellophane paper?

A:Check the signal cable connection.

A:Make sure the video card is fully inserted in its slot.

Q:Have the screen colors become strange after running a program or due to a crash between applications?

A:Reboot the computer.

Q:Has the video card been set properly?

A:Set the video card by referring to the video card manual.

The screen suddenly has become unbalanced.

Q:Have you changed the video card or the driver?

A:Adjust screen image position and size using the OSD.

Image 60
Contents LCD Monitor SyncMaster 2043FW/2043FWX/2243FW/2243FWXSafety Instructions PowerNotational Notational ConventionsInstallation Clean Others Page Page Page Page Package Contents IntroductionUnpacking Your Monitor Initial Settings FrontRear Brightness buttonUsing the Anti-Theft Kensington Lock Kensington LockCable holding ring Connecting Cables ConnectionsUsing the Stand Monitor Assembly Attaching a BasePage Connections Using the Stand Monitor Assembly Page Using the Software Installing the Monitor Driver AutomaticMonitor Driver Internet web siteInstalling the Monitor Driver Manual Page Page Page Page Page Page How to install the Natural Color software Natural Color Natural Color Software ProgramHow to delete the Natural Color software program MagicTune InstallationInstallation Problems Uninstall System RequirementsHardware MagicRotation Installation Service Packs MultiScreen Installation MB Memory above MB Hard disk space above Adjusting the Monitor Direct FunctionsOSD Lock & Unlock Page Customized key Image Size MagicBright MagicColor Color EffectBrightness SourceOSD Function Picture BrightnessContrast Ized Key Source InformationMagicBright Color MagicColor Color Tone Color Control Color EffectMode 1 Mode 2 Mode GammaOff Grayscale Green Aqua Sepia Image Coarse Fine SharpnessPosition OSD LanguagePosition Transparency Off OnSetup Reset Display TimeSec 10 sec 20 sec 200 sec No Yes Off Timer Auto SourceImage Size Auto ManualAuto Wide Information Troubleshooting Self-Test Feature CheckEnvironment Useful Tips Check ListNo images on the screen. I cannot turn on the monitor Cannot see the On Screen Display Screen shows strange colors or just black and whiteScreen suddenly has become unbalanced Screen is out of focus or OSD cannot be adjusted Check when MagicTune does not function properlyLED is blinking but no images on the screen MagicTune doesnt work properly Page Specifications Environmental considerations PowerSaver Preset Timing Modes Model Name SyncMaster 2043FWX Environmental considerations PowerSaver Preset Timing Modes Specifications GeneralPowerSaver Environmental considerationsPlug and Play Capability Dot AcceptablePreset Timing Modes Model Name SyncMaster 2243FWX Specifications Preset Timing Modes Page Information For Better DisplayProduct Information Image Retention Free Display Information together with Logo or Moving image cycle Page Our LCD Monitor satisfies ISO13406-2 Pixel fault Class Appendix Contact Samsung WorldwideNorth America Latin AmericaCIS Asia PacificTerms Middle East & AfricaCorrect Disposal AuthorityAppendix
Related manuals
Manual 86 pages 840 b Manual 89 pages 55.76 Kb Manual 18 pages 36.4 Kb Manual 17 pages 42.91 Kb Manual 85 pages 13.7 Kb Manual 88 pages 6.08 Kb Manual 196 pages 17.83 Kb Manual 197 pages 26.5 Kb Manual 196 pages 4.38 Kb Manual 196 pages 16.82 Kb Manual 90 pages 38.83 Kb Manual 19 pages 21.58 Kb Manual 18 pages 38.26 Kb Manual 90 pages 59.26 Kb Manual 16 pages 14.51 Kb Manual 19 pages 1.8 Kb Manual 88 pages 18.49 Kb Manual 88 pages 3.26 Kb Manual 86 pages 62.95 Kb