Samsung ML15ASSS/VNC manual Due to the weak signals or a wrong antenna, Channel Auto Program, Save

4_E150MP170MPbody.fm Page 15 Wednesday, September 19, 2001 2:54 PM

Adjusting Your LCD Monitor

Table 1. Screen controls (Continued)

Icon	Menus and			Function Descriptions
	Sub-menus
	■ Manual Tune	Due to the weak signals or a wrong antenna
		configuration, some of the channels may not be tuned
		correctly or there could be a mismatch of the channel
		number between a Real channel and a Program channel.
		Use this menu to fine tune and perform necessary
		corrective actions.
		• Program : Program numbers are given in a
		sequential manner based on the search order of
		Channel Auto Program.
		• Channel: Channel numbers are given according to
		the CCIR or Australia standard channel table.
		• Save
		- Use		buttons to fine tune the picture quality
		and then select "Save"menu. Now press "Menu"
		button to save the fine tuned channel.
		• Add
		- Use this function to add a real channel.
		- Use		buttons to select a desired channel and
		then select "Add" menu. Now press "Menu" button
		to add the channel.
		• Cancel
		- Use this menu to undo the current job.
	■ Stereo System	• In most of the cases, stereo system is automatically
		detected. But, in case you are experiencing audio
		problem, use this menu to manually select the stereo
		system. Currently selected stereo system is
		highlighted and you can change the stereo system
		manually. Use			buttons to select a stereo system.
			B/G		A2
			B/G		NICAM
			I		NICAM
			D/K		NICAM

English 15