Samsung WF0650NHW/XTC manual Adjusting the levelling feet, Connecting the water and drain

Page 17

STEP 3

Adjusting the levelling feet

When installing your washing machine, ensure that the power plug, the water supply and the drain are easily accessible.

1.Slide the washing machine into position.

2.Level your washing machine by turning the

leveling feet in and out as necessary by hand.

3.When your washing machine is level, tighten the nuts using the wrench supplied with your washing machine.

01 SETTING UP

STEP 4

Connecting the water and drain

Connecting the water supply hose

1.Take the L-shaped arm fitting for the cold water

supply hose and connect it to the cold water supply intake on the back of the machine. Tighten by hand.

The water supply hose must be connected to the washing machine at one end and to the water tap at the other. Do not stretch the water supply hose. If the hose is too short, replace the hose with a longer, high pressure hose.

2. Connect the other end of the cold water supply hose to your sink’s cold water tap and tighten it by hand. If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting.

For selected models with an additional hot water intake:

1.Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot water supply intake on the back of the machine. Tighten by hand.

2.Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten it by hand.

3.Use a Y-piece if you only want to use cold water.

setting up your new washing machine _17

WF0650NH-02796D_EN.indd 17

2010-1-12 9:40:44

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Washing Machine Delay End Features of your new samsung washing machineChild Lock Quick WashWide door Safety information Safety informationSafety information Safety information Safety information Safety information Safety information Safety information Safety information Contents Checking the Parts Setting up your washing machineWater Supply Meeting Installation RequirementsElectrical supply and grounding Installing Your Washing Machine Removing the shipping bolts Connecting the water and drain Adjusting the levelling feetConnecting the water supply hose selected models Setting up your new washing machine Connecting the drain hose Powering your washing machineBasic Instructions Washing a load of laundryWashing for the First Time Cycle Selector Using the Control PanelTemperature Activating/Deactivating Washing clothes using the cycle selector Washing clothes manually Laundry GuidelinesFabric Type Load Capacity Detergent drawer Detergent and Additives InformationWhich detergent to use Draining the Washing Machine in AN Emergency Cleaning and maintaining your washing machineCleaning the Exterior Cleaning the Detergent Drawer and Drawer Recess Cleaning the Water Hose Mesh Filter Cleaning the Debris FilterStoring Your Washing Machine Repairing a Frozen Washing MachineCheck These Points if Your Washing Machine Troubleshooting and information codesInformation Codes Code Symbol SolutionCycle Chart Cycle chartAppendix Fabric Care ChartProtecting the Environment Declaration of ConformityPower Consumption SpecificationsW600mm X D450mm X H850mm Memo Questions or COMMENTS?
Top Page Image Contents