A 1
2 |
3 | 9 | |
4 | 8 | |
5 | ||
| ||
6 | 7 | |
|
B C
D E
FG
English
Before Using This Device
Thank you for purchasing the Samsung Lens. For best performance when using this lens, you must keep the camera’s firmware
Special features
Use this multipurpose lens to capture all types of photos from landscapes to
Unpacking
Lens, Lens cap, Lens mount cover, Hood, Case, User manual
•Optional Item: Filter
Layouts (See illustration A)
1 Lens hood mount index 2 Lens 3 OIS switch
4AF/MF switch 5
Attaching and Removing the Lens
► To attach the lens,
1 Remove the lens cap, lens mount cover, and body cap. 2 Align the red mark on the lens with the red mark on the camera body. Then, rotate the lens as shown in the illustration until it locks into place. (See illustration B)
►To remove the lens, press and hold the lens release button, and then rotate the lens as shown in the illustration. (See illustration C)
Setting the Focus Method
Set the AF/MF switch on the lens to AF or MF. (See illustration D) Auto Focus (AF): The focus is adjusted automatically when you
Manual Focus (MF): The focus can be adjusted manually by rotating the focus ring.
Use the MF Assist function and the DMF Responsiveness function to adjust the focus precisely and conveniently. Refer to your camera manual for more details.
Using i-Function
When you press the
1 Rotate the mode dial to P, A, S, M, or i.
2 Press
•Available settings may differ depending on the shooting mode.
Setting | Shooting mode |
| Setting | Shooting mode |
E i |
| Aperture | A, M | |
| value | |||
|
|
|
| |
Z P, A, S, M, i |
| Exposure | P, A, S | |
|
|
| value |
|
Shutter | S, M |
| White | P, A, S, M |
speed |
|
| Balance, ISO |
|
3 Rotate the focus ring on the lens to adjust the setting (or to change the zoom rate in Zmode).
4 Focus and capture the photo.
•To select the items that will appear when you press the
•Available scenes or filter effects in the Emode may vary depending on the camera model.
•If you select Z, the photo resolution will vary according to the zoom rate.
Using the Zoom Ring
Set the composition of the photo (the focal distance of the lens) by rotating the zoom ring on the lens.
When you use the zoom function, focus can be slightly changed. Adjust the focus again before you capture a photo.
Using the Optical Image Stabilization (OIS)
Function (See illustration F)
The user can minimize the shaking of camera by using the OIS function. Set the OIS switch on the lens to ON.
Using a Lens Hood (See illustration G)
To prevent deterioration of image quality by blocking out unnecessary light, use a lens hood. When you are not using the lens hood it can be
When you use a flash in situations where the distance between the subject and the camera is close, the flash light may be partially blocked by the lens or a lens hood. To ensure proper lighting, remove the lens hood or adjust the distance between the camera and subjects.
Using a Filter (optional)
Before putting a filter on the lens, make sure it is compatible. Refer to "Specifications" for compatible filter size.
•A filter is a precise optical product. Keep away from
dust, dirt, or scratches. Also, do not try to mount two or more filters at the same time. Doing so may deteriorate the image quality and cause vignetting (a reduction of an image’s brightness or saturation at the periphery as the viewing angle of the lens is hidden).
•In case of a thick framed filter, the vignetting can occur with a
Specifications
|
| |
Lens Name | SAMSUNG | |
Focal Length | ||
Focal Length in 35 mm | ||
Equivalent |
| |
Lens Construction- | 18 | |
Elements | ||
| ||
Lens Construction- | 12 | |
Groups | ||
| ||
Aspherical Elements | 3 | |
ED Elements | 2 | |
XHR Elements | 2 | |
Angle of View | ||
Maximum Aperture | ||
Minimum Aperture | F22 | |
Number of Diaphragm | 9 | |
Blades | ||
| ||
Minimum Focus | 0.3 m | |
Distance (Wide) | ||
| ||
Minimum Focus | 0.3 m | |
Distance (Tele) | ||
| ||
Maximum Magnification | 0.19X | |
Lens Hood | Included | |
Optical Image Stabilizer | Yes | |
Mount Type | Samsung NX Mount | |
Filter Size | 72 mm | |
Max. Diameter | 81 mm | |
Length | 96.5 mm | |
Weight (Lens Only, | 622 g | |
Approx.) | ||
| ||
Operating Temperature | ||
Operating Humidity |
Health and Safety Information
Please read the following safety tips carefully for proper and safe use.
•Do not stare at the sun through the lens or camera.
This may cause severe damage to your eyes. Warning • Keep your lens or camera away from small children and
pets.
•Do not store the lens in direct sunlight without the lens cap. Direct sunlight that passes through the lens
may combust if it comes into contact with flammable Caution materials.
• Use only sturdy tripods. Lightweight or unstable tripods may fall over and damage the camera.
Lens Storage and Maintenance
•Store the lens in dry and well ventilated areas.
•Do not store the lens in areas of high temperature or humidity or in a closet, car, or confined area where chemicals are stored.
•Do not expose the lens to water.
•The lens’
•Do not use chemicals such as thinner, alcohol, or benzene to remove dust.
•Do not drop the lens or apply excessive shock to it. The lens is a precise optical product.
•Avoid using the lens anywhere there is a sudden temperature change. Keep the lens in a plastic bag or a camera case to prevent condensation from forming on the inside or outside of the lens.
•When carrying or not using the lens, place the lens cap and lens mount cover on the lens to prevent contamination from foreign particles and protect the lens from scratches.
•Do not keep the camera mounted on a tripod without the lens cap.
The inside of the camera can be damaged by direct sunlight.
•Check the lens once every year or two for best performance.
•Do not apply excessive force to the front of the lens.
•For safe use of the lens, mount or dismount the lens while the camera is turned off.
•Samsung is not responsible for any damage incurred by using other manufacturers’ lenses.
•Make sure to change lenses only in a clean environment and do not put your fingers into the lens mount when mounting the lens. Foreign particles may affect shooting results or cause a malfunction if they enter the camera body or the lens.
•Do not transport or store the lens with any part of the tube is extended. Completely retract the lens tube inside the body by rotating the zoom ring on the lens.
•To reduce the amount of dust or moisture that can enter the lens, the lens mount is fitted with a rubber seal. If the seal is damaged or worn, contact a Samsung service center to have it replaced (charges may apply). The rubber seal and the surfaces it contacts may experience wear and tear. This should not affect your camera’s lifespan or performance.
•When using a tripod, position the tripod to avoid contact between the lens and the tripod.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Please refer to the warranty that came with your product or visit our website www.samsung.com for