screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
yy Avoid displaying the same TV channel for long periods.
yy Always try to display any image on full screen, use TV set picture format menu for best possible match.
yy Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
yy Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
For India Only
NEW ZEALAND | 0800 SAMSUNG (0800 726 | www.samsung.com/nz/support |
| 786) | |
| | |
CHINA | 400-810-5858 | www.samsung.com/cn/support |
| | |
HONG KONG | (852) 3698 4698 | www.samsung.com/hk/ |
| | support (Chinese) |
| | www.samsung.com/hk_en/ |
| | support (English) |
| | |
INDIA | 1800 3000 8282 - Toll Free | www.samsung.com/in/support |
| 1800 266 8282 - Toll Free | |
| | |
INDONESIA | 0800112888 | www.samsung.com/id/support |
| 021-56997777 | |
| - Do not cover the slots and openings with a cloth or other materials. |
| - Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface. |
| - Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided. |
• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight. |
• | Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock. |
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a |
| swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately. |
• Make sure to pull out the power cord from the outlet before cleaning. |
• | This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect the |
| environment. Please contact your local authorities for disposal or recycling information. |
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock. |
TV Controller (Panel Key)
Selecting the Media Play
MEDIA.P
Selecting the Menu | | m R s | | Selecting a Source |
| |
PPower off
Return
TV Side Panel | UA23H4003 | TV Rear Panel |
|
| |
other types of waste and recycle them responsibly to promote the sustainable reuse of material resources House hold users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business user should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed other commercial wastes for disposal.
For more information on safe disposal and recycling visit our website www. samsung.com/in or contact our helpline number - 18002668282, 180030008282
For personal and non-commercial use only.
THAILAND | 0-2689-3232, | www.samsung.com/th/support |
| 1800-29-3232 | |
| | |
TAIWAN | 0800-32-9999 | www.samsung.com/tw/support |
| | |
VIETNAM | 1 800 588 889 | www.samsung.com/vn/support |
| | |
GEORGIA | 0-800-555-555 | www.samsung.com/support |
| | |
ARMENIA | 0-800-05-555 | www.samsung.com/support |
| | |
AZERBAIJAN | 088-55-55-555 | www.samsung.com/support |
| | |
UZBEKISTAN | 8-10-800-500-55-500 | www.samsung.com/support |
| | |
KYRGYZSTAN | 8-10-800-500-55-500 | www.samsung.com/kz_ru/ |
| | support |
touch the power cord with wet hands. |
• If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact |
an authorized dealer or service center. |
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially |
when children, elderly or disabled people will be left alone in the house). |
- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat, or cause the |
insulation to deteriorate. |
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, |
chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious damage |
to your set. |
• Use only a properly grounded plug and receptacle. |
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) |
• To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily accessible |
✎✎ To close the Menu, Media Play List, or Source List, press the Controller for more than 1 second.
✎✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions.
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Plug the power cord into a wall outlet, and then press the POWER button to turn on the TV. Set the initial setup following instructions that the TV guides.
✎✎ If you are not using a cable box or satellite box, make you sure have connected the TV to an Aerial or cable connection before you turn on the TV. ✎✎ Connecting the power cord and antenna. (refer to ‘Connections’)
| UA32H5100 |
| UA40H5100 |
| UA40H5140 |
| UA40H5141 |
| UA40H5142 |
VHF/UHF Antenna | UA48H5100 |
UA48H5140 |
| UA48H5141 |
or | UA48H5142 |
UA24H4100
Changing the Input Source
Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.
1.Press the SOURCE button.
2.Select a desired external input source.
■■TV / AV / Component / HDMI1 / HDMI2/DVI
✎✎ You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted.
How to use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, enter Support menu and select Edit Name. Name the device connected to the input jacks to make your input source selection easier.
✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI to DVI
cable, you should set the TV to DVI PC mode under Edit Name.
✎✎ When connecting an AV devices to the HDMI IN 2 (DVI) port with HDMI to DVI cable, you should set the TV to DVI mode under Edit Name.
Information
Press INFO(I), you can see detailed information about the selected external device.
✎✎ Information only available for the current connected source.
Remote Control
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
| Displays and selects the available video |
Turns the TV on and off. | sources. |
|
Press to directly access to channels. | |
Alternately select Teletext ON, Double, Mix or OFF. | Returns to the previous channel. |
| Cuts off the sound temporarily. |
Adjusts the volume. | |
| Changes channels. |
Displays the channel list on the screen. | Displays the main on-screen menu. |
|
Channel Menu
❑❑ Seeing Channels
Channel List
Select a channel in the All Channels, Added Channels screen by pressing the ▲/▼ buttons, and pressing the ENTEREbutton. Then you can watch the selected channel.
✎✎ Using the remote control buttons with the Channel List.
Channel Status Display icons
A channel deleted.
❑❑ Retuning Channels
Area
You can change the desired area.
Auto Store
(Depending on the country)
Picture Menu
Picture Mode t
Select your preferred picture type.
■■Dynamic: Suitable for a bright room.
■■Standard: Suitable for a normal environment.
■■Movie: Suitable for watching movies in a dark room.
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
✎✎ In analogue TV, AV modes of the PAL system, the Tint (G/R) function is not available.
✎✎ When connecting a PC, you can only make changes to Backlight, Contrast, Brightness and Sharpness.
✎✎ Settings can be adjusted and stored for each external device connected to the TV.
✎✎ Lowering picture brightness reduces power consumption.
Picture Options
Picture Reset
Resets your current picture mode to its default settings.
■■Reset Picture Mode : Returns all picture values in the currently.
Sound Menu
Sound Mode t
■■Standard: Selects the normal sound mode.
■■Music: Emphasizes music over voices.
■■Movie: Provides the best sound for movies.
■■Clear Voice: Emphasizes voices over other sounds.
Equalizer
(standard sound mode only)
■■Balance: Adjusts the balance between the right and left speaker.
■■100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
Sound Reset
■■Reset All: Reset all sound settings to the factory defaults.
Selecting the Sound Mode t
When you set to Dual I - Dual II, the current sound mode is displayed on the screen.
| Audio Type | Dual I-II | Default |
| Mono | Mono | Automatic |
A2 Stereo | Stereo | Stereo ↔ Mono | change |
| Dual | Dual I ↔ Dual II | Dual I |
| Mono | Mono | Automatic |
NICAM | Stereo | Mono ↔ Stereo | change |
Stereo | Dual | Mono ↔ Dual I | Dual I |
| Dual II |
| | |
✎✎ If the stereo signal is weak and an automatic switching, occurs, then switch to the mono.
✎✎ Only activated in stereo sound signal.
✎✎ This function is available for all input sources.
Views the Media Play. | | | | Turns the Soccer Mode on or off. |
Quickly select frequently used functions. | | | | Displays information on the TV screen. |
Selects the on-screen menu items and changes the | | | | |
values seen on the menu. | | | | |
Returns to the previous menu. | | | | Exit the menu. |
A | B | C | D | Use these buttons according to the direction on |
Scans for a channel automatically and stores in the TV.
Manual Store
Scans for a channel manually and stores in the TV.
✎✎ According to channel source, Manual Store may be supported.
✎✎ Programme, Colour System, Sound System, Channel, Search, Store: If there is abnormal sound or no sound, reselect the sound standard required.
Channel List Option Menu
■■Colour Tone: Select the colour temperature
✎✎ Warm will be deactivated when the picture mode is Dynamic.
■■Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
4:3: Sets the picture to basic (4:3) mode.
Zoom1/Zoom2: Zoom out 16:9 wide mode vertically to fit the screen
■■Reset: Resets the Equalizer to its default settings.
DTS TruSurround HD t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.
Auto Volume
Setup Menu
Language
Set the menu language.
✎✎ Press ◄ or ► button to select menu language. (According to the different areas, some countries have only one language.)
Time
SLEEP: Automatically shuts off the TV at a preset time. |
UH4100/5100/5140/5141/5142
Set each channel using the Channel List menu options. Option menu items may differ depending on the channel status.
■■Add / Delete: Delete or add a channel to display the channels you want.
✎✎ All deleted channels will be shown on the All Channels menu. ✎✎ A “
” beside the channel indicates the channel has been deleted. ✎✎ The Add menu only appears for deleted channels.
Fine Tune
on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI(720p/1080i/1080p) signals are inputted.
✎✎ NOTE
xxDepending on the input source, the picture size options may vary. xxThe available items may differ depending on the selected mode. xxSettings can be adjusted and stored for each external device connected
sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Speaker Select
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
✎✎ When you set Speaker Select to External Speaker, the TV’s speakers are turned off. You will hear sound through the external speakers only.
■■Clock Set: Set the Year, Month, Day, Hour, Minute.
■■On Timer/Off Timer
✎✎ Current time should be set first by Clock Set.
Repeat: Set the timer to repeat by Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun, Sun.
Select Off to turn of Repeat.
Hour/Minute: Enter the hour and minute for the TV to turn on or off.
Contents: Select TV.
Display Modes (HDMI/DVI Input)
Optimal resolution
4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz
| | Horizontal | Vertical | Pixel Clock | Sync Polarity 1366 x 768 1920 x 1080 |
Mode | Resolution | Frequency | Frequency | Frequency |
Installing batteries (Battery size: AAA)
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually.
✎✎ Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.
✎✎ This is available for analogue broadcasts only.
to an input on the TV.
■■Digital Clean View: (Auto / Off / Low / Medium / High) If the broadcast signal received by your TV is weak, you can activate the Digital Clean View feature to reduce any static and ghosting that may appear on the screen.
✎✎ When the signal is weak, try other options until the best picture is displayed.
When you set Speaker Select to TV Speaker, both the TV’s speakers and the external speakers are on. You will hear sound through both.
✎✎ When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
✎✎ If there is no video signal, both speakers will be mute.
Channel: Select the channel to be played when the TV turns on automatically.
Volume: Select the volume level when TV turns on automatically.
■■Sleep Timer t
Automatically shuts off the TV after a preset period of time. (Off, 30 min, 60 min, 90 min, 120 min, 150 min and 180 min)
✎✎ To cancel Sleep Timer, select Off.
| A | B | C | D | Use these buttons according to the direction on |
E-MANUAL: Not available. | | P.SIZE | SLEEP | | screen. |
E-MANUAL | | |
P.SIZE: Selects the picture size. | | | | | Use these buttons in a specific feature. |
SLEEP: Automatically shuts off the TV at a preset time. | | | | | |
UH4003
| 640 x 480 | 31.469 | 59.940 | 25.175 | -/- | c | c |
| 640 x 480 | 37.861 | 72.809 | 31.500 | -/- | c | c |
| 640 x 480 | 37.500 | 75.000 | 31.500 | -/- | c | c |
| 800 x 600 | 37.879 | 60.317 | 40.000 | +/+ | c | c |
| 800 x 600 | 48.077 | 72.188 | 50.000 | +/+ | c | c |
| 800 x 600 | 46.875 | 75.000 | 49.500 | +/+ | c | c |
| 1024 x 768 | 48.363 | 60.004 | 65.000 | -/- | c | c |
| 1024 x 768 | 56.476 | 70.069 | 75.000 | -/- | c | c |
| 1024 x 768 | 60.023 | 75.029 | 78.750 | +/+ | c | c |
VESA DMT | 1152 x 864 | 67.500 | 75.000 | 108.000 | +/+ | | c |
| 1280 x 720 | 45.000 | 60.000 | 74.250 | +/+ | c | c |
| 1280 x 800 | 49.702 | 59.810 | 83.500 | -/+ | | c |
| 1280 x 1024 | 63.981 | 60.020 | 108.000 | +/+ | | c |
| 1280 x 1024 | 79.976 | 75.025 | 135.000 | +/+ | | c |
| 1366 x 768 | 47.712 | 59.790 | 85.500 | +/+ | c | c |
| 1440 x 900 | 55.935 | 59.887 | 106.500 | -/+ | | c |
| 1600 x 900RB | 60.000 | 60.000 | 108.000 | +/+ | | c |
| 1680 x 1050 | 65.290 | 59.954 | 146.250 | -/+ | | c |
| 1920 x 1080 | 67.500 | 60.000 | 148.500 | +/+ | | c |
✎✎ NOTE
xxUse the remote control within 23 feet from TV.
xxBright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs.
xxThe Colour and shape may vary depending on the model.
process film signals from all sources and adjust the picture for optimum quality.
✎✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
■■Motion Lighting: Reduce power consumption by brightness control adapted motion.
✎✎ Only available in Standard mode.
■■Analogue Clean View: Reduces diagonal noise in picture caused by the crosstalk of signals.
✎✎ Not available for H4003.
✎✎ The Melody does not play.
--When no sound is output from the TV because the volume has been reduced to minimum with the VOL – button.
--When the TV is turned off by Sleep Timer function.
Auto Power Off
The TV will be automatically turned off when no user operation is received for 4 hours.
✎✎ If the Auto Power Off option is set to Off, the TV will stay on even if no operations are performed on the TV.
Warning! Important Safety Instructions
Displays and selects the available video
Returns to the previous channel. 
Cuts off the sound temporarily.
Changes channels.
Displays the main 
Turns the Soccer Mode on or off.
Displays information on the TV screen.
Exit the menu.