Radio Shack 1500 Resetting Telephone, Making Connections, Installing the Phone on a Desk

43-976.fm Page 7 Monday, August 16, 1999 4:38 PM

4.Replace the cover and secure it with the screw.

Note: The telephone automatically tests the batteries each time it receives a call. If appears on the display or the display dims, replace the batteries.

Important: When you replace the bat- teries, have fresh batteries on hand before you begin. You must install fresh batteries within 2 minutes after removing the old batteries. Otherwise, you might lose all the information stored in the phone’s memory.

RESETTING THE

TELEPHONE

Before you use the telephone the first time, or to clear all the stored informa- tion from the telephone at any time, press RESET using a pointed object, such as a straightened paper clip.

MAKING THE

CONNECTIONS

Your System 1500 connects to a mod- ular phone jack. Choose a location for your phone that is near a modular phone jack and away from normal ac- tivities. You can place it on a desk or mount it on a wall plate or directly on a wall.

If your telephone wiring does not have a modular phone jack, you can update the wiring yourself. RadioShack stores sell the necessary jacks and adapters to convert older wiring methods to modular wiring. Or, you can have the telephone company update your tele- phone wiring for you.

Note: The USOC number of the jack to be installed is RJ11C for a base- board jack, or RJ11W for a wall jack.

Installing the Phone on a Desk

1.Plug one end of the supplied long modular cord into the TEL. LINE jack on the phone.

Note: Immediately after resetting the telephone, 12--00 AM appears on the display until you receive a call. Then the telephone company auto- matically sends the correct time to update your phone’s time display.

2.Plug the other end of the modular cord into the modular phone jack.

7