Initial setup, Selecting the video source

Initial setup

The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish the initial setup process, including the selecting the menu language, scanning channels, connecting to the network, and more. During each step, either make a choice or skip the step.

You can manually perform this process at a later time in the System > Setup menu.

-- If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to Set- top box automatically.

-- If you do not want to select Set-top box, please select Aerial.

Password Change

System > Change PIN

Changing the TV’s password.

1.Run Change PIN and then enter the current password in the password field. The default password is “1-1-1-1”.

2.Enter a new password and then enter it again to confirm it. The password change is complete.

-- If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to “1-1-1-1”:

For the Standard Remote Control: In Standby mode: MUTE → 8 → 2 → 4 → POWER (On)

For the Samsung Smart Control: When the TV turns

on: MUTE → Volume up → RETURN → Volume down → RETURN → Volume up → RETURN

Selecting the video source

You can select a connected external device using the SOURCE button.

For example, to switch to a gaming console connected to the second HDMI connector, press SOURCE. From the Source list, select HDMI2 to change the input signal to HDMI mode. Connector names may vary depending on the model.

The following options are available in the Source screen:

Alternatively, simply designate a computer connected to the TV via an HDMI cable as PC.

You can also designate an AV device connected to the TV via an HDMI-DVI cable as DVI Devices.

Information

View detailed information about the connected devices.

TOOLS Button

Select a port connected to an external device, and press and hold the Enter button. The following functions are available:

-- Available options for each connector may vary.

Edit Name

Rename devices connected to the TV for easier identification of external sources.

For example, you can designate a computer connected to the TV via an HDMI-DVI cable as DVI PC.

Anynet+ (HDMI-CEC)

Displays a list of Anynet+ (HDMI-CEC)-compliant devices that are connected to the TV.

-- This option is only available when Anynet+ (HDMI- CEC) is On.

Disconnect USB Device

Used to safely remove a USB device connected to the TV. This option is only available when a USB device has been selected.

Samsung UE55HU7200DXZT Initial setup, Selecting the video source, Password Change, Tools Button