Samsung BD-E5500/ZN ĞĞ Wireless general Automatic, ĞĞ Wireless general Manual, Settings English

NOTE

\\ Depending on your Windows version, the information may differ.

Wireless Network

You can setup a wireless network connection in three ways:

-- Wireless Automatic -- Wireless Manual -- WPS(PBC)

When you configure the wireless network connection, any wireless network devices currently connected through the player or, if applicable, the player's current wired connection, will be disconnected.

ĞĞWireless (general) - Automatic

To setup, follow steps 1 to 3 in "Configuring Your Network Connection" on page 18.

1.Select Wireless (general) in the Network Settings screen, and then press the v button.

The player searches for and then displays a list of the available networks.

Settings

Display	Network Settings		1/11
Audio	Select your wireless router from the list:
Network	XXXXX	WEP
System	XXXXX	WPA
Language	XXXXX	WPA
Security	XXXXX	WPA
	XXXXX	WEP	Refresh
General
Support	a Previous	m Move " Enter	' Return

2.Select the desired network, and then press the v button.

The Security screen appears.

3.On the Security screen, enter your network's Security Code or Pass Phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing the v button.

4.When done, select Done at the bottom of the screen, and then press the v button. The Network Status screen appears. The player verifies the network connection and then connects to the network.

NOTE

\\ You should be able to find the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem.

ĞĞWireless (general) - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 18.

1.Select Wireless (general) in the Network Settings screen, and then press the v button.

The Network Status screen appears. The player attempts to verify the network connection and fails.

Settings			Network Settings
Display				MAC Address	XX:XX:XX:XX:XX:XX
Audio				IP Address	0.0.0.0
Network		KT_WLAN		Subnet Mask	0.0.0.0
				Gateway	0.0.0.0
System				DNS Server	0.0.0.0
LanguageIP auto setting failed. Try the following to set up the IP automatically:
	- Ensure that the DHCP server is enabled on the router, then restart router.
Security- Contact your Internet service provider for more information.
	Alternatively, set up the IP manually by selecting IP Settings.
General				Retry
Support		IP Settings
					OK
		a Previous		<Move "Enter 'Return

2.Select IP Settings on the bottom of the screen, and then press the v button. The IP Settings screen appears.

3.Select the IP Mode field, and then set it to Manual.

-- For the IP setting values, see "Getting

the IP Settings values" on page 18.

4.Use the number keypad on your remote to enter the Network values. Use the ▲▼◄► buttons on the remote to move from entry field to entry field.

5.When done, highlight OK, and then press the v button.

The Security screen appears.

6.On the Security screen, enter your network's Security Code or Pass Phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing the v button.

7.When done, select Done at the bottom of the screen, and then press the v button. The Network Status screen appears. The player verifies the network connection and then connects to the network.

ĞĞWPS(PBC)

To setup, follow steps 1 to 3 in "Configuring Your Network Connection" on page 18.

1.Select WPS(PBC) in the Network Settings screen, and then press the v button.

The player searches for and then displays a list of the available networks.

2.Press the WPS(PBC) button on your router within two minutes. Your player automatically acquires all the network settings values it needs and connects to your network. The Network Status screen appears. The player connects to the network after the network connection is verified.

04 Settings

English 19