Lightolier LCS8G12PR132 Photometry, Ordering Information, Options/Accessories, Specifications

Lytecel Recessed Fluorescent LCS8G12PR132

Page 2 of 2 For Continuous Row Mounting – 6-1/2" wide, 12 Cell (1 Row) Parabolic Louver, Static, 1 Lamp T8, IES RP1 For VDT Areas

Photometry Model No. LCS8G12PR132120SO

G02090

LCS8G12PR132120SO

THIS REPORT IS BASED ON PUBLISHED INDUSTRY PROCEDURES • FIELD PERFORMANCE MAY VARY FROM LABORATORY PERFORMANCE.

LER = FP - 53.2			IW - 32	BF - 0.92
Comparative yearly lighting energy cost per 1000 lumens = $4.53
	coefficients of utilization — zonal cavity method
		RF		20					20					20
		RC		80					50					30
		RW	70	50		30		50	30	10			50	30	10
		1	73	71		69		67	66	65			65	64	63
	ratio	2	69	65		62		62	59	57			60	58	56
		3	64	59		56		57	54	51			55	53	50
	cavity	4	60	54		50		52	49	46			51	48	45
		5	56	50		45		48	44	41			47	43	41
	room	6	53	46		41		44	40	37			43	40	37
		7	49	42		37		41	37	34			40	36	34
		8	46	39		34		38	34	31			37	33	31
		9	43	36		31		35	31	28			34	31	28
		10	41	33		29		32	29	26			32	28	26
	visual comfort probability
		room size				ceiling height						ceiling height
	W		L		8.5	10.0	13.0		16.0		8.5	10.0	13.0		16.0
20			20		92	95	93		82		99	98	97		92
20			30		93	95	93		83		99	98	97		94
20			40		93	95	93		83		99	98	98		94
	20		60		95	96	93		83		99	98	98		94
30			20		93	95	94		85		99	98	97		93
30			30		93	95	93		86		99	98	98		94
30			40		93	95	93		86		99	98	98		94
30			60		96	96	94		886		99	98	98		94
	30		80	lengthwise	96	97	94		86	crosswise	99	98	98		94
40			40		93	95	94		86		99	98	98		94
40			20		93	95	94		86		99	98	98		93
40			30	luminaries	93	95	93		86	luminaries	99	98	98		94
40			60		96	96	94		86		99	98	98		94
40			80		97	97	94		86		99	98	98		94
	40		100		97	97	94		86		98	98	98		94
60			30		93	95	94		86		99	98	98		94
60			40		93	95	94		86		99	98	98		94
60			60		95	96	94		86		99	98	98		94
60			80		97	97	94		87		99	98	98		94
	60		100		96	97	95		87		98	98	98		94
100			40		93	95	94		86		99	98	98		94
100			60		97	96	94		87		99	98	98		94
100			80		97	97	93		87		98	98	98		94
	100		100		96	97	93		87		98	98	98		95

Ordering Information

Explanation of Catalog Number. Example: LCS8G12PR132120SOGLR

LC

S

8

12

R

1

Blank = Standard

Body Style:

Ceiling

Type:

Louver

Finish:

Lamp

N = NYC Code

S=Static

G = 15/16" Grid

P=Low

Quantity

N = 9/16" Grid

Iridescence

T = Slot Grid

Specular

LC:

Fixture

Number of

L=Low

Lytecel 8"

Width

Cells:

Iridescence

Continuous

1 row of

Semi-specular

12 cells

Reflector:

R= Semi-Specular

95%

Reflective

32

	Voltage:				Options:
	120 or 277			Add appropriate
				suffix to catalog
				no, ie: (GLR)
Lamp Fixture
Length:
		Ballast type:
32=T8
			<20THD		<10THD
(Nominal 48")	1 Lamp Elec. T8
			SO*		HI*

*Instant Start Standard

Other dimming options, consult factory.

DA=DALI digital addressable dimming.

Options/Accessories

Access Plate: Top Wiring access plate is shipped with fixture as standard. When access plates are required in advance for wiring convenience, specify separately. Order Catalog Number: ACP5 CSP.

Electrical/Wiring Options: Consult factory.

Fusing: Internal fast-blow fusing. Suffix: GLR.

Internal slow-blow fusing. Suffix: GMF.

Chicago Plenum: Suffix: CP.

Specifications

Performance: In an installation of 1 lamp 32W luminaires in a room cavity ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .71 with a spacing to mounting ratio of 1.5 perpendicular to the lamps. To meet IES RP-1 for VDT areas the VCP (visual comfort probability) shall not be less than 95 either crosswise or lengthwise and the candela value between 55° and 90° in the 0° to 90° planes shall not exceed 844. Candelas at Nadir (0°) not to exceed 908.

Materials: Chassis parts are die-formed cold rolled steel. Housing is with all edges turned-in for safe handling.

Louver: Pre-anodized aluminum (Coilzak® or equal).

Specifications (continued)

Finish: Louver—specular low iridescence pre-anodized reflector sheet.

Reflector: Semi-Specular reflector sheet, 95% reflective. Chassis exterior— black baked polyester enamel.

Electrical: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

Labels: I.B.E.W./UL and ULc Listed.

Job Information	Type:
Lightolier a Genlyte Thomas Company		www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Copyright 2004 Lightolier		Section2/Folio G07-19