Samsung UE40ES8000QXZT, UE46ES8000QXZT, UE55ES8000QXZT manual Setup Initial Setup

Installing batteries (Battery size: AAA)

Match the polarity of the batteries to the symbols in the battery compartment.

1

2

3

✎✎ NOTE

•• Install the batteries so that the polarity of the batteries (+/-) matches the illustration in the battery compartment.

•• Use the remote control within 23 feet of the TV.

•• Bright light may affect the performance of the remote control. Avoid using when near special fluorescent lights or neon signs.

•• The colour and shape may vary depending on the model.

Setup (Initial Setup)

When you turn the TV on for the first time, a sequence of prompts and screens will assist you in configuring basic settings. To begin Setup, press the Pbutton on your remote.

✎✎ Setup is available only when the input source is set to TV. See "Changing the Input Source" (p. 14). ✎✎ To return to the previous step in the Setup sequence, Select Previous.

✎✎ Before you begin, make sure you have connected the TV to an aerial or a cable connection and that the TV is plugged in. (p. 5). ✎✎ To start the Setup select Start.

1	Menu Language:
	Select a Language.
2	Use Mode: Select the Home
	Use Mode.
3	Network Settings: Configure
	network settings
	✎✎ To connect later, select
	Skip.
4	Software Upgrade: Upgrading
	the software to latest version

✎✎ To upgrade later, select Skip.

Select a menu language you want using your remote, and then select Next. The TV will be displayed a menu using the selected language since next step.

Select Home Use using your remote, and then select Next.

Store Demo mode is for retail environments.

To set up your network connection, select Start using your remote. If you do not know your network set up information or want to set to it later, select Skip. For more detailed information, refer to “Setting up the Wired or Wireless Network” in the e-Manual for set up requirements and instructions, and the Network Connection section of this manual (p. 18). You can set up the network connection later using the Network menu.

Select Next to upgrade TV software. Your TV will automatically upgrade, if your TV need a software upgrade. If you want to upgrade later, select the Skip. For more information, refer to Software Upgrade (Preference Features → Support Menu) in the e-Manual.

✎✎ This may take some time, depending on network status.

English - 11