Basic Functions
Listening to Radio
Using buttons on the Remote Control
1.Press the FUNCTION button to select FM.
2.Tune in to the desired station.
•Preset Tuning 1 : You must first add a desired frequency as a preset. Press the STOP ()
button to select PRESET and then press the
TUNING/CH (
) button to select the preset station.
•Manual Tuning : Press the STOP () button to
select MANUAL and then press the TUNING/CH
(
) button to tune in to a lower or higher frequency.
•Automatic Tuning : Press the STOP () button
to select MANUAL and then press and hold the
TUNING/CH (
) button to automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
KEYCON
• Each time the button is pressed, the sound switches between STEREO and MONO.
•In a poor reception area, select MONO for a clear,
5.Press the TUNER MEMORY button again.
•Press the TUNER MEMORY button before number disappears from the display.
•Number disappears from the display and the station is stored in memory.
6.To preset another station, repeat steps 2 to 5.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1.Press the FUNCTION button to select FM.
2.Press the TUNING/CH (
) button to select
<89.10>.
3.Press the TUNER MEMORY button.
• Number flashes on the display.
4. Press the TUNING/CH ( | ) buttons |
to select preset number. |
|
•You can select between 1 and 15 presets.