(MODELSAPPLIED:SR-608EV/648EV/688EV)
Please lift up and pull out the water tank. | Groove for |
• Please hold the groove of both hand |
|
grips and pull out the water tank while |
|
lifting it up. |
|
• Please clean the inside of water tank |
|
when using it for the first time.(Refer to |
|
page 21) |
|
Please fill the water tank with water after placing it up on flat surface except for water supply device.
•Please supply the water up to 2.5l of water level window since water may overflow when closing the round lid if water is too full.
•It is possible to fill the water with water tank inserted in the refrigerator.
Water level window
Round lid |
|
Water tank |
|
Water supply device |
|
Method 1.: Please fill the water after lift up the round lid | Method 2.: Please fill the water after holding and lifting |
to the arrow direction to open it. | both |
Please close the refrigerator door after inserting the water tank.
•Please confirm whether the water exit of water supply device is outside after closing the door.
Please press down the water supply lever with hands after placing cup on platform for cup.
•Please lay the cup deep inside to the extent the cup can reach the inner wall slightly.
•If hands were removed from cup, there is no water supplied.
•Please desert 2~3 cups of water when using the water dispenser for the
first time after installation.
• In case of continuous water drinking, about 10~15 cups of water are availble.
20