Surround Mode function, Connecting Headphones

Surround Mode function

Your compact system is equipped with the function of Power Sound/Power Surround/Power Surround XT.

The Power Surround replaces conventional stereo sound with a wider and more true-to-life sound. It creates the feeling of being right at the centre of the music and being surrounded by total music sound.

The function of Power Sound amplifies bass and improves high key or bass twice as much for you to appreciate powerful real sound.

Press SURROUND MODE button until the required option is selected. Each time the SURROUND MODE button is pressed, “P.SOUND,P.SURRD ,P.SUR XT, OFF” is selected or cancelled in this order.

		USB/MP3-CD/CD
		MUTE
	VOLUME	TUNING/
	VOLUME	ALBUM
		ALBUM

SURROUND	EQ/S.BASS	TUNING
MODE	EQ/S.BASS	MODE
		+10

EQ /S.BASS (Super Bass) Function

Your Micro Component system has a bass amplification function and equipped with a preset equaliser that allows you to choose the most appropriate balance between treble and bass frequencies , according to the type of music you are listening to.That is called EQ/S.BASS.

This function makes the sound more powerful and real.

Press EQ/S. BASS on the front panel or EQ/S. BASS on the remote control until the required option is selected.

To obtain a...	Select...

Normal balance (linear)	PASS
Balance suitable for pop music	POP
Balance suitable for rock music	ROCK
Balance suitable for classic music	CLASSIC
Balance suitable for jazz music	JAZZ
Balance suitable for s-bass music	S-BASS

		USB/MP3-CD/CD
		MUTE
	VOLUME	TUNING/
	VOLUME	ALBUM
		ALBUM

SURROUND	EQ/S.BASS	TUNING
MODE	EQ/S.BASS	MODE
		+10

Sleep Timer

You can set the system to switch off automatically. Example: You wish to fall a sleep to music.

1 Press SLEEP on the remote control.

Result: The following indications are displayed:

2 Press SLEEP one or more times to indicate how long the system should continue playing before it switches off:

90 MIN 60 MIN 45 MIN

OFF 15 MIN 30 MIN

At any time, you can:

Check the remaining time by pressing SLEEP

Change the remaining time by repeating Steps 1 and 2

3 To cancel the sleep timer function, press SLEEP one or more times until OFF is displayed and the word SLEEP disappears.

TIMER	TIMER/CLOCK	PROGRAM/SET
ON/OFF
SLEEP	REP A-B	REPEAT

1,2,3		TAPE SPEED
MO/ST	COUNT RESET	TAPE SPEED
CD SYNC	RDS
	DISPLAY	PTY

TAPE

MUTE Function

You can turn the sound off temporarily.

Example: You wish to answer a telephone call.

1	Press MUTE.
2	To switch the sound back on (at the same volume as before), press
	MUTE again, or turn VOLUME button.
		TAPE
		USB/MP3-CD/CD
		MUTE
	VOLUME	TUNING/
	VOLUME	ALBUM

Connecting Headphones

You can connect a set of headphones to your micro

component system so that you can listen to music or radio GB programs without disturbing other people in the room.

The headphones must have a 3.5 mm connector or appropriate adaptor.

Connect the headphones to the Phones connector on the rear panel (or top right corner).

Result: The loudspeakers are no longer used for sound output.

Prolonged use of headphones at a high volume may damage your hearing.

Tape Counter

When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus start play- back at the beginning of the track to which you wish to listen.

The counter is only displayed when a cassette is being played.

Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing and holding COUNTER RESET.

POWER	DEMO/
	DIMMER
		USB
TIMER	TIMER/CLOCK	PROGRAM/SET
ON/OFF
SLEEP	REP A-B	REPEAT
MO/ST	COUNT RESET	TAPE SPEED
CD SYNC	RDS
	DISPLAY	PTY