Samsung MM-E320/ZF, MM-E330/EN manual Press Tuning Mode button, For a Satation, Preset, Manually

Listening to Radio Selecting a Stored Station

You can store up to:15 FM stations.

1.Press FUNCTION to select FM mode.

	To search		Press TUNING MODE button
	for a
	satation
2.
		...	Once or more times until
	Preset		“PREXX(FM XX)” is displayed.
			You can search the stored
			frequencies in the Preset mode.
			Once or more times until
	Manually	...	“MANUAL” is displayed.
			You can search the frequencies
			one by one in the manual mode.

•MM-E330 display "PRE XX" and MM-E320 display "FM XX".

3.Select the satation in any of the following ways:

◆◆Press the TUNING/ALBUM , or . button on the remote control.

◆◆To fast scan for a frequency manually, press and hold the TUNING/ALBUM , or .button.

4.Press MO/ST to switch between stereo and mono.

•In a poor reception area, select MONO for a clear, interference-free broadcast.

•This applies only when listening to an FM station.

5.If you don’t want the preset, move back to step 3 and select a different preset.

Otherwise,

a. Press ENTER.

b. Or, press the [,] button on the top panel or TUNING/ALBUM , or . button on the remote control to select a program number.

c. Press ENTER to save the preset.

6.To save other radio frequency, repeat steps 2

through 5 above.

In Tuner Mode

•To scan for radio frequencies in manual mode, use the [,] buttons on the top panel.

•To stop scanning, press STOP (@).

•To scan for a preset in preset tuning mode, use the [,] buttons.

10English

You can listen to a stored radio station as follows:

1.Press FUNCTION to select FM mode.

2.Press the TUNING MODE button on the remote control until “PRE XX(FM XX)” is displayed.

•MM-E330 display "PRE XX" and MM-E320 display "FM XX".

3.Press [,] button on the top panel or TUNING/ALBUM , , . on the remote control to select a desired preset number.

About RDS broadcasting(Optional)

Using the RDS (Radio Data System) to receive FM stations

RDS allows FM stations to send an additional signal along with their regular program signals.

For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.

When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display.

Description on RDS function

●● PTY (Program Type) : Displays the type of programme currently being broadcast.

●● PS NAME (Program Service Name) : Indi- cates the name of broadcasting station and is composed of 8 characters.

●● RT (Radio Text) : Decodes the text broad- cast by a station (if any) and is composed of maximum 64 characters.

●● CT (Clock Time) : Decodes the real time clock from the FM frequency. Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases.

●● TA (Traffic Announcement) : When this symbol flashes it shows that the traffic an- nouncement is in progress.

RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak.

About RDS DISPLAY function(Optional)

You can see the RDS signals the station sends on the display.

Press the RDS DISPLAY button while listening to an FM station.

Each time you press the button, the display change to show you the following information : PS NAME ; RT; CT ; Frequency