Energy-Saving Operation

Energy-Saving Features

If using a multi system, this function is not supported.

Single user function

Use the Single user function to reduce electricity consumption while staying cool or warm. You can select this function in the Cool and Heat modes.

In the Cool or Heat mode ►
NOTE
• When the Single user function starts, the	pattern

appears on the remote control for a few seconds, and vertical air swing begins automatically.

•If you select the Single user while such function as 2-Step cooling, Fast, Comfort, Quiet, or good'sleep are running, these modes are cancelled.

•After selecting the Single user function, you can change the set temperature (24 °C to 30 °C in the Cool mode, 16 °C to 30 °C in the Heat mode), fan speed, and vertical air flow direction.

•When the Single user function is turned on in the Cool mode while the set temperature is set to lower than 24 °C, the set temperature is automatically raised to 24 °C. But if the set temperature is set to between 25 °C and 30 °C, it remains the same.

•Even after you turn off the Single user function, vertical

air swing continues until you turn it off with the Vertical air swing () button.

•You can also start the Single user function by pressing the

Options () button.

In the Cool or Heat mode ► ► ►

Select Single user. ►

22English

New Boracay EU IB_DB68-06181A-00_EN_A5.indd 22

2016/4/18 18:57:36