Radio Shack PLVH2 owner manual Removing the headphone batteries

Page 3

Removing the headphone batteries:

To remove the batteries, open the battery lid as described above and pull the battery out of the battery compartment by pushing the battery towards the spring until the plus pole is released and slides out.

ATTENTION!

Never leave batteries inside the headphones for very long periods of time to prevent any damage to the headphones from leaking batteries. Dispose of spent batteries conforming to local waste disposal rules.

Check the remaining power of the headphone’ s battery:

When install two batteries into the battery compartments, switch on the headphone by slide the switch to “ON” position. Check that the headphone’s power indicator lights in red. You can now use the headphone. Charge the battery or install a new dry battery, if the power indicator light is weak or turned off and the sound becomes distorted or has a lot of noise.

3

Image 3
Contents PLVH2 Infrared Headphone Operation for the headphone batteries Installing the headphone batteriesRemoving the headphone batteries Check the remaining power of the headphone’ s batteryListening to a program