Supported by the monitor | Samsung LS20PMASF6/EDC, LS20PMASF/EDC

supported by the monitor.

3. Display Adapter Driver

Display adapter refers to the computer video card driver.

If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot install the monitor driver.

1.Checking Adapter Driver

Click Start Settings Control Panel Display Settings Advanced Adapter.

If "Default" or a wrong product model is indicated, it means that the adapter driver is not properly installed. Install the adapter driver again according to the information provided by the computer or video card manufacturers.

2.Installing Adapter Driver

The instructions given below are for general circumstances.

For specific issues, contact the relevant computer or video card manufacturers.

1)Click Start Settings Control Panel Display Settings Advanced

Adapter Update Driver Next Display a list of the known drivers for this device so

that I can choose a specific driver Next Have Disk (Insert Video Card Driver diskette) OK Next Next Finish.

2)In case you have Adapter Driver Setup file on your computer:

Run Setup.exe or Install.exe, which is found in the Adapter Driver Setup file.

4.Maintenance and Cleaning

1.Maintaining the Monitor Case.

Clean with a soft cloth after disconnecting the power cord.

zDo not use benzene, thinner or other flammable substances, or a wet cloth.

zWe recommend a Samsung cleansing agent is used to prevent damage to the screen.

2.Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly.

zNever use acetone, benzene or thinner.

(They may cause flaws or deformation of the screen surface.)

zThe user will be required to pay costs and related expenses for repair of damages caused by him/her.

5.Symptoms and Recommended Actions

A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the SOURCE of the problem, and then contact a service center or your dealer.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if you installed the adapter(video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 60 Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

Check List

The following table lists possible problems and their solutions. Before calling for service, check

LS20PMASFZ/EDC, LS20PMASF6/EDC, LS20PMASFT/EDC, LS20PMASF/EDC specifications

The Samsung LS20PMASF/EDC and LS19PMASF/EDC are innovative display solutions that appeal to users looking for high-quality visuals, ergonomic designs, and user-centric features. These models are part of Samsung's latest lineup, demonstrating the company’s commitment to delivering cutting-edge technology in the realm of monitors.

One of the standout features of both models is their Advanced Picture Quality, driven by Samsung's proprietary display technologies. The screens utilize a high-resolution panel that produces sharp and vibrant colors, enhancing the viewing experience for both work and entertainment. Users can enjoy accurate color reproduction and impressive contrast ratios, making these monitors suitable for tasks that require attention to detail, such as graphic design or video editing.

The LS20PMASF/EDC model comes equipped with a 20-inch screen, while the LS19PMASF/EDC features a slightly smaller 19-inch display. Despite their different sizes, both monitors support Full HD resolution, ensuring a crisp and clear image quality. The displays are designed with ultra-thin bezels, maximizing the screen area and providing a sleek aesthetic that fits seamlessly into any workspace.

In terms of connectivity, these monitors provide multiple input options, including HDMI and VGA ports. This flexibility allows users to easily connect their devices without hassle, supporting a wide array of applications, from casual browsing to professional software utilization.

Ergonomics play a crucial role in both models, with adjustable stands that enable users to modify the height and angle of the screen. This feature is particularly beneficial for prolonged usage, as it helps reduce neck strain and enhances comfort during long working hours. Additionally, the monitors are designed to minimize blue light emissions and flicker, promoting eye comfort and reducing fatigue.

Samsung has also incorporated energy-efficient technologies in these monitors, aligning with modern sustainability standards. This not only reduces the environmental impact but also contributes to lower power consumption, further appealing to eco-conscious users.

In summary, the Samsung LS20PMASF/EDC and LS19PMASF/EDC are exceptional monitors that combine high-quality visuals with ergonomic features. With their sleek designs, versatile connectivity options, and user-friendly characteristics, these displays are ideal for enhancing productivity and providing an exceptional viewing experience. Whether for personal use or professional tasks, Samsung continues to define innovation in display technology with these remarkable products.